200/300 tdi engine in a freelander??

dom leadenham · Oct 2, 2011

hi,
Just out of curiousity has anyone put a 200/300 tdi engine in a freelander because ive been told the 200tdi engine and the di engine are similar im not convinced myself bt thats what ive been told!!
Or if ya know if its possible or not

Hippo · Oct 2, 2011

It's too tall un will stick out the bonnet. You'll have problems connecting it to the gearbox. They're mounted differently in tratters. Apart from that, it's a direct replacement.

Let us know how you get on. Don't forget we likes pic's.

Pikey · Oct 2, 2011

think peeps are mixing up the d-lander which is a disco chassis withe a GRP Gaylander body shell mounted on it.

waldershelf · Oct 2, 2011

dom leadenham said:
hi,
Just out of curiousity has anyone put a 200/300 tdi engine in a freelander because ive been told the 200tdi engine and the di engine are similar im not convinced myself bt thats what ive been told!!
Or if ya know if its possible or not

They are similar in that they are both 4 cylinder diesel engines further than that forget it.

sible88 · Oct 2, 2011

Anything is possible with the right bank balance lol
But it will not be easy or cheap.

The Mad Hat Man · Oct 2, 2011

cheaper & easier to fit the freelander body on to a 200tdi disco chassis

Pikey · Oct 2, 2011

The Mad Hat Man said:
cheaper & easier to fit the freelander body on to a 200tdi disco chassis

I already done that bit^^^ :doh:

Suris · Oct 2, 2011

:nothingtoadd::hysterically_laughi: Just too daft for words really.

The Mad Hat Man · Oct 2, 2011

redhand said:
I already done that bit^^^ :doh:

no yu dint - yu mentioned the D-lander which is bespoke - not a gayovery hybrid.

dom leadenham · Oct 3, 2011

thanks for that lads and mad hat man that sounds like a better idea just godda convince the wife now lol................
what kind of stuff am i looking at to mount the freelander shell on a disco chassis?
is there any bild threads on here (im gonna have a look now but just in case i cant find it)

300bhp/ton · Oct 3, 2011

dom leadenham said:
thanks for that lads and mad hat man that sounds like a better idea just godda convince the wife now lol................
what kind of stuff am i looking at to mount the freelander shell on a disco chassis?
is there any bild threads on here (im gonna have a look now but just in case i cant find it)

Lots of work and for little gain. Might as well buy and run a Disco.

Mounting the FL on a traditional chassis will result in something weighing a lot more than a Disco (so worse performance on and off road). And retain none of the Freelanders ability and positive attributes.

dom leadenham · Oct 3, 2011

well i was begging to wonder about that tbh, i think its about time i sold the gaylander and but a disco i think

Hippo · Oct 3, 2011

dom leadenham said:
thanks for that lads and mad hat man that sounds like a better idea just godda convince the wife now lol................
what kind of stuff am i looking at to mount the freelander shell on a disco chassis?
is there any bild threads on here (im gonna have a look now but just in case i cant find it)

cube on lro did it and got it working. Loads of pic's of the build stages in these threads, but they're in the reader photo section so you'll need a login to see them.

Land Rover Owner • Login

Land Rover Owner • Login

dom leadenham · Oct 4, 2011

cheers hippo,
Ive registered but ive godda wait to be approved. should be a good read

200/300 tdi engine in a freelander??

dom leadenham

New Member

Hippo

Lord Hippo

Pikey

Dummy Ejection Facilitator..

waldershelf

Well-Known Member

sible88

New Member

The Mad Hat Man

Well-Known Member

Pikey

Dummy Ejection Facilitator..

Suris

Banned

The Mad Hat Man

Well-Known Member

dom leadenham

New Member

300bhp/ton

Well-Known Member

dom leadenham

New Member

Hippo

Lord Hippo

dom leadenham

New Member

Similar threads