2.5TD piston wobbling! HELP!!!

rob_rossi_46 · Jun 27, 2011

Hi,
my land rover 90 2.5TD recently "after" an MOT started to make a very loud rattle, (like a spitfire), i took it to a garage and one of the pistons was wobbling and needs to be replaced. (it flew through the MOT £45)
what is the easiest way to do this?
new engine?
piston and re-bore?

any advice would be excellent on how anyone has done it or alternatives. other pistons are fine only 1 wobbles.

thanks
Rob

fanatic · Jun 27, 2011

200 tdi conversion

jamesmartin · Jun 27, 2011

if you have a problem with bores/piston, you need to rebore to new piston size +20 or +40 you buy pistons and get block bored then honed to size,for one to go is unusual unless its little end, or oil squirt at bottom of bore has broken, you have to do all 4 ,rebore usually £125 pistons with rings, each ring will need removing and pushed into bore squarely with piston and gap measured and filed to size if necessary

fanatic · Jun 27, 2011

jamesmartin said:
if you have a problem with bores/piston, you need to rebore to new piston size +20 or +40 you buy pistons and get block bored then honed to size,for one to go is unusual unless its little end, or oil squirt at bottom of bore has broken, you have to do all 4 ,rebore usually £125 pistons with rings, each ring will need removing and pushed into bore squarely with piston and gap measured and filed to size if necessary

200tdi

2.5TD piston wobbling! HELP!!!

rob_rossi_46

New Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

jamesmartin

Well-Known Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Similar threads