2.5 na diesel advice.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

colinironman

New Member
Posts
1
Location
Birmingham
Hi,I am a new member,was working on my land rover( pheobe) i was working to put the air filter back on(it is off a sherpa,thought it would be easier to service) ha,no such luck there,I found i was a washer missing,by the time i realised this it had disappeared down the inlet manifold,carried on working,oblivious of this fact,I then went to start the truck,and was greeted with a very loud rattling,from said engine,now,two questions spring to mind,1 do I have to strip the head off,and 2, will it come out on its own,I know I have been a t##t to let it happen any help would be appreciated,many thanks,colin.
 
Welcome to the woody copses of landyzone. As you see through the trees, there is a choice of sections. Each will have better outcome of help.
IMG_20210926_120636_3~3.jpg
 
Welcome to the forum
I7pha4t.jpg


This section is for introductions only. For technical help you will get a better response by posting your questions in the vehicle specific sections listed below, where owners of those vehicles will offer more detailed advice. Don't worry, a lot of new members post technical questions in here.

Main forum index:
https://www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9

Defender, 90, 110, 130 (tratters)
https://www.landyzone.co.uk/forum/defender-90-110-130.7

Series 1, 2, 3 (tratters)
https://www.landyzone.co.uk/forum/series-land-rovers.6

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10
 
Back
Top