2.5 n/a new downpipe needed. help please ;)

Hi all, as the title says I need a new downpipe 1986 2.5 n/a. I've found one by "all makes 4x4" in their picture the pipe has a few bends in meanwhile mine is just straight down then right angle onto the next section. Will it fit? Here's the link below. any other sites with downpipes for 2.5 n/a would be great! Thanks .


Down Pipe for Land Rover Defender (NOT NAS) 2.5 Diesel NA ESR1617 - 1989

reading that one you linked to says 1987 - 1991 which is why it is diffrent to yours I have an C reg 85/86 my self and mine is stright as well.

Ok yeah just realized that. Do you know of anyone that will do the 86 downpipe as I cant find anything on interweb!? Craddocks have somthing about downpipes but no pictures and ****e description.

ok done a bit or work think you want,

110.679 Downpipe - Defender 90 - Diesel 2.5 NA 1984-'86 4 piece system

https://www.angloparts.com/en/catalogues/group/2687

If you click View parts illistration at the top, it brings up drawings number 9 is prob what you want, but i would double check all of this, as all i have done is google this intel no expert on this at all.

here is my one.

That is great thanks so much for the help. Yes i agree the diagram shows 110.679 but I'll also check. My downpipe has rusted out of the center pipe so it ratles like no tomorrow! Cheers.

Good to see mine looks the same and second picture can see where it has rusted insde the clamp and is blowing from.

Think mine must have been replaced at some point as it looks far to new.

Haha yeah your lucky saved you a pig of a job I've been doing today bolts sheared both ends and had to take manifold off in the end. Manifold was a pain couldn't get to last bolt next to the bulkhead and my spanners get sparking on the starter motor haha made me jump a few times