2.5 N/A Diesel Engine Block

Guys,

Does anybody know where I can get my hands on an old 2.5 N/A diesel engine block circa 1990 that someone has transplanted out in favour of a TDi or V8?
The condition is imaterial because I want to recondition it myself. I would prefer the bores to be in reasonable shape because I don't want to overbore if possible.

Many thanks

Ebay..working £50...dodgy £25

Should have posted yesterday I just took my old working 25 n/a to the scap yard this morn got 50 quid for it, was a bit surprised to get that much

you would most likely have to go + 40,and dont forget to remove oil squirts before getting bored and leave at least 1 thou to hone to size ,some bore to size and put cross hatch on surface looks good but will smoke burn oil etc,if you get stuck i would have block ,2,25 diesel 5brg 2.25 petrol 5 brg ,2.5 petrol are same block so is td if you block feed and drain hole