19J Head Gasket, Which Way Is Up?

My engine is coming together quite well. I am now about to fit the cylinder head.
The manual states that the head gasket should be fitted with the embossed ''Diesel" uppermost.
Well my new gasket does not have "diesel" stamped on it and the old gasket, which has, was fitted with the diesel stamp downwards. This meant that the raised part of the gasket was at the top coinciding with the hotspot inserts.
Does anyone have a definitive opinion please.

Thx.

the metal half moons for hotspots face the head and if you look ar rear drivers side theres an oil feed hole

Thx for the reply.
That was my what I thought. The workshop manual is clearly wrong!!
What does the oil feed hole do, as the rockers are lubricated from the external oil feed pipe.