1995 disco tdi300 numberplate light

ericthered · Nov 3, 2010

I have been told that to change one of these bulbs ,its the back door panel off , there are 2 screws in the covers which are heavily rusted ,is it just a case of taking these out .

ETR

janderson41 · Nov 3, 2010

According to Haynes all you do is loosen the two screws,lift out the light unit, then remove bulb and replace with new.Give the screws a good dose of wd40first. Replace with new or even self tappers.

cheers
jim Anderson
1996 300Tdi auto(Jap reimport)

SHORT ROUND · Nov 3, 2010

drill out the 2 screws mate normally 2 min job but with drilling and changing screws may take 10-15 mins

ericthered · Nov 3, 2010

thanks for that lads didnt fancy going in through the back door .:doh:

1995 disco tdi300 numberplate light

ericthered

New Member

janderson41

Active Member

SHORT ROUND

Active Member

ericthered

New Member

Similar threads