110 chassis repair

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

Rutlover

New Member
Posts
4
Hi guys new to this forum, currently re-building/ building a 110...

Starting on the chassis in the next week and before I start trawling google for repair sections does anyone know the best place to buy the repair sections. The main but that is rotten is the a frame crossmember...

Any replies much appreciated

Thanks Rutlover
 
RNH697.jpg


Which cross-member / parts of the chassis is rotten? Front, middle or back

If it is the rear cross-member you can buy kits. I'm not so sure with the other cross-members. Apart from that you will need to buy some 3mm plate and a MIG welder.

It would probably a good idea to get a new chassis if the cross-member has gone through as other parts of the chassis may not be far behind. It depends on how far you are going with the re-build.
 
Center crossmember where the A frame bolts to as I stated.. Love to get a new chassis but money does not allow me to do this. I'm a weld/fabricator so making one is not an issue but for the time and materials I thought I may be able to buy one for similar sort of price?

Thanks rutlover
 
You dont get them :(

Though there would be a market....

Nothing says it has to be a box. Its a round on a disco :)

I know of one 90 with a flat 12mm plate as a x member.
 
You must log in or register to reply here.

Similar threads

MacStu
LT95 mainshaft wear
2
Replies
21
Views
2K
dag019
dag019
F
110 Pickup Chassis/Bulkhead Swap order of events
Replies
14
Views
3K
Knappster
Knappster
R
Rear chassis rails repair
Replies
6
Views
1K
frostythor
frostythor
--ped--
300 chassis engine gearbox location
Replies
5
Views
1K
landowner
landowner
N
'98 300 Tdi 90
Replies
5
Views
985
nigxls
N
Back
Top