20mm wheel spacers ???

[Dazz]

Does anyone know if a 20mm spacer will be enough clearance to fit pre 2000 alloys to a 2003 td4. Thanks

 

[Dazz]

Does anyone know if a 20mm spacer will be enough clearance to fit pre 2000 alloys to a 2004 td4. Thanks

nobody knows the answer then ??????

 

[nathan5346]

I dont know

 

[Dazz]

I dont know

Thanks

 

[*minty*]

Thanks

nath probably does know and will tell u the answer eventually

 

[Dazz]

Does anyone know if a 20mm spacer will be enough clearance to fit pre 2000 alloys to a 2003 td4. Thanks

Nobody knows the answer to this one then?

 

[GRATCH]

apparently the standard answer to any freelander problem is to burn it and get a defender. HTH

 

[doobreydog]

Dont know but why...plenty of newer one available and you can probably pick up a set of wheels easier and cheaper than spacers

Easy way to find out is make a cheap spacer (Steel wheel nuts are probably about 20mm) and try it

 

[Dazz]

Dont know but why...plenty of newer one available and you can probably pick up a set of wheels easier and cheaper than spacers

Easy way to find out is make a cheap spacer (Steel wheel nuts are probably about 20mm) and try it

I have been given a set of alloys already fitted with new grabber 215 65 16 tyres off a 98 freelander and want to fit them on to a 2005 td4 .

 

[Dann]

The clearance required is approximately 6mm.

 

[Dazz]

Thanks

 

[Philip1972]

Hi Dazz

How did you go on with the spacers?

I have a 2005 and can get a set of 2000 wheels-do the spacers defo get round the problem?

Cheers

Phil

 

[patrickkavanagh]

Just checking how you guys are getting on with this. I have made some serious modifications to my 01 Freelander so I should have some stuff lying around if you need anything. I have 01 model alloys and I think I have 35mm spacers too...

 

[vic.middleton]

I have been given a set of alloys already fitted with new grabber 215 65 16 tyres off a 98 freelander and want to fit them on to a 2005 td4 .

Early wheels will not fit post facelift models. There is a difference in the spiggot and/or the PCD.