bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 14,902
- Location
- Doncaster
Not today, it's early, but yesterday I mostly just fossicked about looking for rust and ****e .. Very little on the boot floor, but the sound pad was wet through, so I'm now looking round for something more suitable to put in there. Has anyone replaced theirs, and if so what did you use?
Checked headlights as left one wobbled a bit, one of the cups was broke so replaced that. Did a bit of Kurust coverage around the light boxes and battery mount/inner wings, but nothing to speak of really. Well impressed, only small scabs of rust, everything's mostly solid and still same colour it should be!
Sills looking reasonable, certainly not rusty, but might need attention soon, so we've again started to look at rockguards/treesliders/sill replacements. Got materials, just need some round tuits now.
And my nephew and his welding kit ..
Checked headlights as left one wobbled a bit, one of the cups was broke so replaced that. Did a bit of Kurust coverage around the light boxes and battery mount/inner wings, but nothing to speak of really. Well impressed, only small scabs of rust, everything's mostly solid and still same colour it should be!
Sills looking reasonable, certainly not rusty, but might need attention soon, so we've again started to look at rockguards/treesliders/sill replacements. Got materials, just need some round tuits now.
And my nephew and his welding kit ..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
thick rubber matting (Machine Mart do it) If you wanted you could silicone all the way round the edges and make it completely watertight.
- Posts
- 14,902
- Location
- Doncaster
I wondered about that .. inch of weld, four inched nothing then another inch of weld .. bloody poor if you ask me ..
Good call, we've got a screwfix literally at the end of the road at the end of our road, chers ..
Good call, we've got a screwfix literally at the end of the road at the end of our road, chers ..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I wondered about that .. inch of weld, four inched nothing then another inch of weld .. bloody poor if you ask me ..
Good call, we've got a screwfix literally at the end of the road at the end of our road, chers ..
I was on about siliconing the matting in place. As the rot is caused by water seeping under the soundproofing and lying on the floor, As you've foundout yourself the LR soundproofing acts like a giant sponge and hold the water in. The rubber mat won't do this. so you can either fit it in 2 strips and leave it so it's removable, or silicone it in permanently.
oil dripper
Well-Known Member
- Posts
- 5,659
- Location
- Here i think
Becky B
New Member
- Posts
- 412
- Location
- Chelmsford
fitted dog guard still fitting 3" lift kit taking so long as having to do it twice
swampdonkey
New Member
- Posts
- 384
- Location
- a star system nearby
your going for 6''? well they say size matters!
Becky B
New Member
- Posts
- 412
- Location
- Chelmsford
no lolhaving to take it off the 300 then take my bits off then put back onn both vehicles hence doing it twice
swampdonkey
New Member
- Posts
- 384
- Location
- a star system nearby
phew.......you had me sweating there for a min becky!
Andy200TDi
New Member
- Posts
- 269
- Location
- Nottinghamshire
Adjusted the free play out of the steering box... what an easy job! then measured the front wheel alignment and thought I'd better adjust the tracking...
adjustment bar on track rod siezed... after smacking me face into the brake disc, I gave up! Tyre's knacked anyway, so I'll get the tyre fitters to free it up
adjustment bar on track rod siezed... after smacking me face into the brake disc, I gave up! Tyre's knacked anyway, so I'll get the tyre fitters to free it up
Becky B
New Member
- Posts
- 412
- Location
- Chelmsford
- Posts
- 83,232
- Location
- Embasinga stocæ
swampdonkey
New Member
- Posts
- 384
- Location
- a star system nearby
and there was me looking forward to her fotos lol
stuart sharpe
Active Member
- Posts
- 140
- Location
- essex,thurrock
gave my range rover a wash and polish today after a good day laning yesterday and found a tide mark half way up the inner door card (see green lanes, essex lanes).
nickh75
Well-Known Member
- Posts
- 3,052
- Location
- near derby
just had another piggy back coz the clutch slave cylinder is fooked,
managed about 3 miles changing with no clutch then had to stop at a junction an that was the end of that!
tow truck home for me AGAIN
bastid land rovers:banghead:
so i'm gonna get pi#sed an think how i'm gonna fix it
or should i do a gaylander special a chuck a gallon af petrol in it?
managed about 3 miles changing with no clutch then had to stop at a junction an that was the end of that!
tow truck home for me AGAIN
bastid land rovers:banghead:
so i'm gonna get pi#sed an think how i'm gonna fix it
or should i do a gaylander special a chuck a gallon af petrol in it?
