MOT FAIL.. Is it worth repairing????

[The Mad Hat Man]

here are some more pics include cross section thro near side Disco Sill. Hope they help
last one is spot welds.

 

[Little Miss Knuckles]

Thanks alot Mad, Hes well on his way now !!! Picys help so much !
Well he is going to replace all the hex bolts and washer and Nyloc nuts as all of them currently on / off are really rusted and corroded !
Anyway what im now worried about is the fact that its taken 7 and a half hours to being sort of close to removing 1 sill both front brackets and both inners sills have to be done for no later than Thurs this week Hmmmm :violent::violent::violent::violent::screaming_bug_eye_f:screaming_bug_eye_f:screaming_bug_eye_f:Cry::Cry:


Thanks alot !!

Little knux

xxxxxxxxxxx

 

[The Mad Hat Man]

erm - well its taken me 3 months to do one inner wing - so dont hold ya breath.....

[smile]MHM duz a good job (but slow)[/smile]

 

[The_Big_P]

Hey Daft, how is Tuftee coming along?

 

[The Mad Hat Man]

Snot!


waiting for my Schutz to turn up and the weather to get warmerer.
Talking of which...................


an idea - to warm up waxoil - how about using an old immersion heater element in a bucket - or an old kettle with the top cut off.

 

[The_Big_P]

I just stood the can of Waxoyl in a bucket of hot water (remove the lid from the Waxoyl though)

 

[The_Big_P]

That reminds me, I've got a can of Waxoyl and high pressure sprayer (new) kicking around I no longer need that I should get advertised in the local rag, and me tools come to think of it...

 

[Richard Martin]

That reminds me, I've got a can of Waxoyl and high pressure sprayer (new) kicking around I no longer need that I should get advertised in the local rag, and me tools come to think of it...

How come you no longer need it? Have you sold your Disco?

 

[The_Big_P]

Me Disco got vandalised and Admiral have wrote it off!

 

[The-Wappy-One]

well i've called it a day oh what fun!!!


I havent even removed the dam sill yet lol.

What a learning curv.... from what i have done about 3 hours should be saved just on removing the bolts lol


well i've managed to get most of the spot welds i carn't get to some as half are covered with another sheet of metal, im gonna guess its the previous owners handy work,

The outer sills are in pretty good nick just a few areas to patch thats all.

im gonna grind down whats left and then im on to the welding lol..


Oh and Thanks for all the advice while i was under the landy it was appreciated ... it actually proved handy the wife being on here lol.






Oh and one more note i've actually enjoyed working on her so much so the missis has said she might get me a old defender to restore ))) and learn on!

 

[Zeph]

Well done, I had my outer sills replaced last year by a local radiator/welding co.
(I chickened out after buying a welder).

But if it fails again this year on welding i'm going to have a go myself.

 

[rustyrangie]

:nopics:
good on ya wappy it's good to see somebody keeping a good motor out of the crusher, i've spent ages under me rangie and still got a long way to go, plenty of people wonder why i've bothered but the newuns are for nancy boys and i like my old v8 so i figured a bit of blood and sweat spent now will keep her good for a few years to come. getting all the spot welds out can be a real arse as mentioned before make sure you get rid of as much rot as poss coz it comes back and will ruin your work in no time at all if you leave it in there

 

[martinl]

And the old ones dont have all the fancy electricery bits to go bang when its wet and muddy..

 

[rustyrangie]

ere martin, i just had a look at ya pics of your rangie etc, fair play to ya for riding all that way on that italian vibrator

 

[martinl]

ere martin, i just had a look at ya pics of your rangie etc, fair play to ya for riding all that way on that italian vibrator

:hysterically_laughi

A Duke gets in your blood just like a Landy, LOL good fun tho, that was a fair trip... things we do for love eh?..

 

[The-Wappy-One]

Fristrated is not the word lol

Im giving it a five min break as its freezing and snowing..

I have the sill off and i've cleaned it up BUT i've now put the replacment sill in BUT i can't get the bushes in as they are too thick any suggestions for sorting these out to fit these in.


Regards

Wappy

 

[Pikey]

Fristrated is not the word lol

Im giving it a five min break as its freezing and snowing..

I have the sill off and i've cleaned it up BUT i've now put the replacment sill in BUT i can't get the bushes in as they are too thick any suggestions for sorting these out to fit these in.


Regards

Wappy

Bushes or polybushes.?? soapy water helps as well as a nut and bolt and a large socket or thick washer thru the centre and tightened up so it draws the bush into the housing.

 

[The-Wappy-One]

Bushes or polybushes.?? soapy water helps as well as a nut and bolt and a large socket or thick washer thru the centre and tightened up so it draws the bush into the housing.

Im guessing there Polly bushes but im unsure..


i've squased them down with welding mole grips(they have a flat ends)

But the second i remove them they exspand again

im now at a dead end.......

i've attached a pic where the bush needs to go and i just wont

But again thanks for the advice but im sure im doing something wrong..

ohh and there is my old sill

 

[Pikey]

Im guessing there Polly bushes but im unsure..


i've squased them down with welding mole grips(they have a flat ends)

But the second i remove them they exspand again

im now at a dead end.......

i've attached a pic where the bush needs to go and i just wont

But again thanks for the advice but im sure im doing something wrong..

ohh and there is my old sill

Put a long bolt thru the hole with a socket or something similar on the other side of the hole to prevent the bolt from coming thru the hole

place bush over bolt place washer or similar and put nut on bolt

Tighten nut so that bush is pressed into hole use a flat screwdriver or similar to push the leading edge of the bush into the hole keep tightening until bush is fully inserted.

 

[The-Wappy-One]

The things you do for your landy!

i've got then on but it wasn't till 4pm and the snow was getting a little too much..

I have one question,, yes another one!

Would it matter if i put the bolt in upside down?

Eg rather than having the head at the top and the nut at the bottom just doing it the other way arround? (could this fail a MOT?)

i say this as i mentioned earlier getting the bolt out was quiet hard getting it back in is even harder lol...

ohh me in the the snow for a pic lol well i say snow