martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
This is the mig mate I saw on ebay, 250361543348
MOT FAIL.. Is it worth repairing????
- Thread starter The-Wappy-One
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
I thought he was patching his sills not his chassis?
By the way, one of these will go well with the angle grinder, along with the cutting and grinding discs Twist Knot Wire Cup Brushes - Machine Mart
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
My own MIG is a SIP turbo 130, its good enough and doesnt blow the house fuses, LOL but for chasis work I tend to use my arc welder whenever possible but the 130 will cope too.
If I had to recomend then a 130 will do. Certainly non of my Landies have ever come apart after welding but I am a lloyds certified welder too
If you want to chat, 07710868160 or [email protected]
If I had to recomend then a 130 will do. Certainly non of my Landies have ever come apart after welding but I am a lloyds certified welder too
If you want to chat, 07710868160 or [email protected]
heggars
Nec flectitur nec mutant
- Posts
- 498
- Location
- Dover, Kent
I see you used to be a Gloucesterman then.. QRZ QRZ DE 2E0VWW
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
I'm from Wolverhampton really, G6ZHV. Lived in Telford for a few years then Mitcheldean in Gloucs unil two years ago. Now in Cannock.
I'm still on the radio although I given up the big rigs and contests now, I just use a Two/70/6mt fm handie..
Done a lot of motorcycle trials and then LWB trials with Wye and Welsh.
Dah dit dah dah dit G0JCN
I'm still on the radio although I given up the big rigs and contests now, I just use a Two/70/6mt fm handie..
Done a lot of motorcycle trials and then LWB trials with Wye and Welsh.
Dah dit dah dah dit G0JCN
heggars
Nec flectitur nec mutant
- Posts
- 498
- Location
- Dover, Kent
Got to be honest thats where i mainly play now, 145MHz
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
I hardly ever bother these days, but I do enjoy taking it To Poland, XYL is Polish and its fun bing QRV in Warsaw.
The-Wappy-One
Active Member
- Posts
- 162
just waiting on a responce from ebay and im in with a mig welder
as for the sills
The rear im gonna get these... x2
and then these for the sills.... x2
Just thinking for my first time this will make things easyer its gonna cost me £136
Would it be a case of unbolt the old sills (i noticed two bolts on each) then cutting out the sills with a grinder??? im gonna guess being gentle not to cut throught the outer sill?
Sorry if i sound patchy i've found loads of sites with pictures but no oune explaning how to remove lol just my luck.....
as for the sills
The rear im gonna get these... x2
and then these for the sills.... x2
Just thinking for my first time this will make things easyer its gonna cost me £136
Would it be a case of unbolt the old sills (i noticed two bolts on each) then cutting out the sills with a grinder??? im gonna guess being gentle not to cut throught the outer sill?
Sorry if i sound patchy i've found loads of sites with pictures but no oune explaning how to remove lol just my luck.....
- Posts
- 83,235
- Location
- Embasinga stocæ
best (but more time consuming) to drill out the spot welds.
addicted2welding
New Member
- Posts
- 60
- Location
- Aberdeenshire
AAAAAHHHH !!! Much welding needed , DROOOOOOOLLLL !!!! all that lovely welding fumes , MMMMMMMM !!!! :smokin:
Dent
New Member
- Posts
- 1,051
- Location
- North shropshire
Good decision to fix it, to many being scrapped, there might be loads about now but in a few years time...? now't decent being built now just pretty boy ****e . I still think about the mk1 escort avo i let them turn into a fridge.
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
just waiting on a responce from ebay and im in with a mig welder
as for the sills
The rear im gonna get these... x2
and then these for the sills.... x2
Just thinking for my first time this will make things easyer its gonna cost me £136
Would it be a case of unbolt the old sills (i noticed two bolts on each) then cutting out the sills with a grinder??? im gonna guess being gentle not to cut throught the outer sill?
Sorry if i sound patchy i've found loads of sites with pictures but no oune explaning how to remove lol just my luck.....
you got it, yes.. only dont be afraid of cutting too much, if its rotten it needs to come out, you can make good with patches afterwards. just bolt the new sill onto the chassis and make good around it. sounds easy LOL.
Yes the rear mounts are fine, you may need a boot floor panel too. how are the inner wings, a favourite rot point?
The-Wappy-One
Active Member
- Posts
- 162
Right i have my welder on the way..
S0771 130AMP MIGWELDER C/W GAS & 2 REELS 0.8MM MIGWIRE on eBay, also, Other Garage Equipment Tools, Garage Equipment Tools, Cars, Parts Vehicles (end time 06-Feb-09 00:21:21 GMT)
Just gotta sort some cash and i'll be getting the sills on Monday
A NEW TOOL TO MY COLLECTION!!!!
lol I'll keep you updated when i start, might upload some pics of my practice attempts lol
Will the 0.8mm wire be good enough for the Sills?
S0771 130AMP MIGWELDER C/W GAS & 2 REELS 0.8MM MIGWIRE on eBay, also, Other Garage Equipment Tools, Garage Equipment Tools, Cars, Parts Vehicles (end time 06-Feb-09 00:21:21 GMT)
Just gotta sort some cash and i'll be getting the sills on Monday
A NEW TOOL TO MY COLLECTION!!!!
lol I'll keep you updated when i start, might upload some pics of my practice attempts lol
Will the 0.8mm wire be good enough for the Sills?
landroverjoe
New Member
- Posts
- 6
- Location
- from manchester, sevimg in germany
am in catterick, for a few weeks if you need a hand, its been a while since ive had a landy in bits,
my welding is not that good so dont ask, but would be willing to give u a hand if u need it,
my welding is not that good so dont ask, but would be willing to give u a hand if u need it,
The-Wappy-One
Active Member
- Posts
- 162
Yea i've found a guy in wakefield (5 mins away) who has empty bottles and he carges £15 for refills! dont knwo how much he charges for the bottles tho? im gonna use that gas for practice
landroverjoe would love to but i think your a little too far but thanks for the offer
Yea i've found a guy in wakefield (5 mins away) who has empty bottles and he carges £15 for refills! dont knwo how much he charges for the bottles tho?
landroverjoe would love to but i think your a little too far but thanks for the offer
whats he filling them with for that price ?
The-Wappy-One
Active Member
- Posts
- 162
Not sure i've emailed for full details. i would hope a argon mix as im sure ive seen (im not 100%) co2 for about £8 but im more after something quick as i have 9 days left for my re-test
Unless some one knows where i can get co2/argon mix in the wakefield area? (WF5)
Similar threads
Freelander 1
Epic fail (or not?)
