Hippo
Lord Hippo
- Posts
- 52,190
Me bobbin would gerrup set if he seen that happening.
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 8,759
- Location
- Solent
Can ear the IOW festival in me garding. Course they is the other side of the Solent!
- Posts
- 41,852
- Location
- East Dorset
Iv'e not a problem doing it really, I'm just moaning. I have to use a big reeled tape measure and it is difficult hold one end down on my own, as I don't want to be hauling slabs around etc to act as weights.Measure the gap slab to slab, add 'overhang' for both ends, same for the wid-ethe
The things is the edges will be bound, extra cost but it'll make it last longer. If I get it wrong I can't just simply clip a bit off which I could if I got a cheapo one. So at well over €300 I don't want to make a boo-boo!
It doesn't help that that tape starts measuring right at it's tip. Typical builders jobbie designed to be hooked over summat.
I'll just have to hook it over summat else, bung a big stone on it then do some maffs!
Cheers!
- Posts
- 41,852
- Location
- East Dorset
I'm ordering it edged to give it longevity otherwise yep that would work fine!
- Posts
- 66,836
- Location
- The Wooly Witch
Arthur Brick works well on this sort of job ...
Hippo
Lord Hippo
- Posts
- 52,190
Eye is leaving me grass to grow longerer assits no mow june. Last night eye spotted somefink has rubbed up un down me grass in a line assif yer pulled a full 2L bottle wiv some string. It walked up me grass then back on a different route. Eye is wondering iffits me hedgehog rubbing its belly.
- Posts
- 41,852
- Location
- East Dorset
Our pool is 3.64 metres wide and 8 metres long.It comes on rolls 2m + a little bit wide so order close enough over as you will have to trim for any stairs they run it through the hot iron to stick it together. Don't forget to get the rolley up pole and straps for it. Ours is at 26 now checked it today and gave the shark a run so probably have a dip tomorrow.
J
I've got a rolley up pole I can use, came off the old pool cover. I'll make stuff to support it with offcuts of big wood I have hanging around.
No idea how warm it is, it needs a damn good clean first. I'll only do that if it is warm enough for us and our guests to use.
Being a salt pool at least cleaning it is quite easy, well usually, if my back is normalish!
When you say "chlorinator" is that what you mean? The Frogs call them "generators".
I also have to lower the level so the skimmer can work.
I can only dream of having a shark! I know they are brill.
- Posts
- 66,836
- Location
- The Wooly Witch
Didja mizzit on yer Camera 1 ?
- Posts
- 41,852
- Location
- East Dorset
Brix? In Froggy land?
We have blocks or those funny honey comb jobbies and ain't got an odd one of either at the mo!I'll be using a lickle bit of slab what I uses normally to tether the thermometer!!
- Posts
- 41,852
- Location
- East Dorset
Could it be Mr Brock?
- Posts
- 41,852
- Location
- East Dorset
Just watching the fly past for the trooping of the colour.
Planes spelling out "CR" very accurately. Very impressive!
Planes spelling out "CR" very accurately. Very impressive!
doriz
Well-Known Member
- Posts
- 16,782
Aye,
- Posts
- 6,085
- Location
- uk
In my days as a setting out engineer on construction sites, I used a 14lb sledge hammer to hold the end of the tape down (when working single handed).
- Posts
- 41,852
- Location
- East Dorset
Done it!
Ordered an evryfing!
Stone56
Well-Known Member
- Posts
- 2,685
- Location
- Up a mountain
The bats are back
That's a good little gadgetAfternoon folks
Well fixed the chlorinator, not as I first thought but hey its sealed and not leaking when running.
View attachment 290784
So I thought I could cut a 115mm soil pipe seal and superglue it, hitch the superglue has superglued itself to the inside of the tube and isn't coming out to play. Ok out with the contact glue, Right now lets try it, Fail water all over the pump room and me
Got this while in the UK,
View attachment 290785
Think I have most bits for the summer garage project, just need some engine and gearbox mounts then I think that's enough to do it to it.
Oh its a little bit of trickery that means a Gems ECU will run standalone with out the BECM
Off out to eat in a mo as neither of us can be bothered to think of what to have for tea
Full on petrolhead day tomorrow with F1 and MotoGP
You all have a relaxing weekend doing what you like/want
J
Stone56
Well-Known Member
- Posts
- 2,685
- Location
- Up a mountain
- Posts
- 41,852
- Location
- East Dorset
Ended up measuring it including both end slabs, then took off the widff of them and added on the two overhangs.
To measure up slab to slab I'd a had to hook the end of the tape onto thin air, or stick it under me bit o slab then do yet more sums!
Don't like sums.
Maths A level is for poop.
- Posts
- 66,836
- Location
- The Wooly Witch
What's Up: June 2023 Skywatching Tips from NASA | NASA Solar System Exploration
Mars and Venus get closer, the bright stars of Summer, and how an ancient scholar used the June solstice to determine the size of planet Earth.
solarsystem.nasa.gov
- Posts
- 15,338
- Location
- Benfleet, Essex
... that I managed to deadlift 3 sets of 10 reps with 60Kg, so I have upped the weight to 62.5Kg for tomorrow and maybe all of next week. If I do that every week then that's 10K more a month..... Until I run out of weights or my thigh bones slide off the top of my shin bones. Lots of "Snap-Crackle & Pop" from the knees, but no pain.
hook it on the outside of the outer stone measure to the inside of the opposing stone - the width of the stone + 1 overhang job jobbed
J
Similar threads
