LetsHopeItFits
Active Member
- Posts
- 411
- Location
- North Wales
Sounds like a "no" to me....
So, Ive found something on fb marketplace (where all the best things are)
Its very clearly an 88 S3, but apparently its registered as a 109, so its obviously a ringer. Now, if its just a parts car, that doesnt matter, so, my question is, would it be within the realms of reasonable land rover purchases, and the law, to buy it and rebuild it onto a brand new 109 galv chassis? Is it possible to get the pannels needed to do this, or would I need to buy ankther body? (In which case its an entirely wasted excercise)
Thanks!
Sounds like a "no" to me....
Santanas - decent modern alternative to a series, or just old rubbish?
Thanks!
Sold S3s under liscence using the santana name until LR went coil when then 90/110 came out, then LR wouldnt let them copy their homework anymore, so santana carries on building and developing the S3 platform, using parabolic springs and whichever engine was supplied by the company they has a deal with at the time
Yes, agree on the parts front.
I dont think the UK delivered ones are left hand drive?
Yes the PS10 has a 2.8 turbo diesel. The 4wd system is also different, its the traditional 2wd - 4wd hi - 4wd low, which isnt as good as the normal LR one, but pretty similar to a series.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!