I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Landy stripped diff oot no damage found :( fink the crunching might be in the tranny.
20210926_101611.jpg
20210926_101418.jpg
 
Afternoon folks:).

Just packed up tools after a bit more work, Nice to say that I was back in shorts and a light raggy shirt & no socks:D.

well the bloke has put his horses(3) and cows (2) in the fenced area and we had to get the little ****land back in again:). He can obviously get out somewhere but then dont have enough smarts to get back:rolleyes:.
A bit of advice that a welding glove and rubber crocs are a great defense against the electric fence:), But when you lift it to let the ****land back in dont touch the chain around her neck:eek:. Yep I got jump started and the ****land wasnt to happy either:oops:.
So had to regroup and make it a 2 person job:D:D.

Cooling off and getting ready to crack a beer to watch the F1, lets see how nice the kids play this week although they are a fair way away from each other this week:).

Enjoy the rest of the day:D
Are we there yet @derwendolly :D:D.

J
 
marjon said:
Afternoon folks:).

Just packed up tools after a bit more work, Nice to say that I was back in shorts and a light raggy shirt & no socks:D.

well the bloke has put his horses(3) and cows (2) in the fenced area and we had to get the little ****land back in again:). He can obviously get out somewhere but then dont have enough smarts to get back:rolleyes:.
A bit of advice that a welding glove and rubber crocs are a great defense against the electric fence:), But when you lift it to let the ****land back in dont touch the chain around her neck:eek:. Yep I got jump started and the ****land wasnt to happy either:oops:.
So had to regroup and make it a 2 person job:D:D.

Cooling off and getting ready to crack a beer to watch the F1, lets see how nice the kids play this week although they are a fair way away from each other this week:).

Enjoy the rest of the day:D
Are we there yet @derwendolly :D:D.

J
Click to expand...
Hi mate!
Are you sorted out for your trip back to Blighty yet?
Just saying as yessdi we used the PCR kits I mentioned and you need to know your NHS number if you do it this way, otherwise it's easy, and cheap.
 
Did an oil service on dottirs focus this morning. Its got minimal ground clearance, tyres are too wide for me old ramps, me home made plank technology ramps are not quite enough height so it was an awkward job. I kept getting me bod stuck on the underside to get at the filter which is at the rear of the engine and above the drive shafts. Luckily the filter was not put on by a gorilla and it came off by hand - just as it should. Gonna have to add another plank to the home made ramps to thicken them up for next service. Another two inches should do it (no actresses or bishops were harmed in this post). Any road up, job done and beer is served :D
 
Stanleysteamer said:
Hi mate!
Are you sorted out for your trip back to Blighty yet?
Just saying as yessdi we used the PCR kits I mentioned and you need to know your NHS number if you do it this way, otherwise it's easy, and cheap.
Click to expand...

Have looked for when I do come back, I still have an NHS number but not sure it will be valid. I will stay with a friend who has done this so she knows and drop off boxes close, till I get my negative result back(2 days) before I go and see parents and Bruv.
But its delayed a little as he is in ospital this week (if there's a bed:mad:) to get him off the opioid drugs:(.

Spoke to him and he is upbeat.:):(.

J
 
Wimblowdriver said:
Did an oil service on dottirs focus this morning. Its got minimal ground clearance, tyres are too wide for me old ramps, me home made plank technology ramps are not quite enough height so it was an awkward job. I kept getting me bod stuck on the underside to get at the filter which is at the rear of the engine and above the drive shafts. Luckily the filter was not put on by a gorilla and it came off by hand - just as it should. Gonna have to add another plank to the home made ramps to thicken them up for next service. Another two inches should do it (no actresses or bishops were harmed in this post). Any road up, job done and beer is served :D
Click to expand...
Get yerself some HippoRamps (TM)
 
Just ordered new underwear and trowsis.
Wifey is now happy.:):):):):)
Whata battle to find ornery pants in amongst the trendy cr@p on sale at M&S or John Lewis.:(

Did something yessdi I've never done afore. Patted the Disco on the bonnet and muttered something like "Well done old girl" as she managed to bring us home, albeit I didn't dare push her much beyond 55 mph all the way cos of her thrum thrum.
Must be getting soft!!;)
Anyway, when I topped up the tank yessdi showed how much more economical it is driving at that speed and honestly it didn't take us that much longer.
Enjoy the rest of your Sundi peeps!:):):):)
 
Wimblowdriver said:
Did an oil service on dottirs focus this morning. Its got minimal ground clearance, tyres are too wide for me old ramps, me home made plank technology ramps are not quite enough height so it was an awkward job. I kept getting me bod stuck on the underside to get at the filter which is at the rear of the engine and above the drive shafts. Luckily the filter was not put on by a gorilla and it came off by hand - just as it should. Gonna have to add another plank to the home made ramps to thicken them up for next service. Another two inches should do it (no actresses or bishops were harmed in this post). Any road up, job done and beer is served :D
Click to expand...
Don't know if I've asked this afore, but why do you not use axle stands?
Speaking as one who uses them all the time.;);););) and yes, wiv bits of wood to p[rotect the underside stuff just like I do with the jack(s)
 
You must log in or register to reply here.

Similar threads

L
Learning to fix Land Rovers like a pro - career advice wanted
Replies
9
Views
512
Andy Warren
Andy Warren
K
What money should I be asking?
Replies
18
Views
529
Anaconda
A
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
966
Lackingsense
Lackingsense
J
300 Tdi engine swap story - and a few questions
Replies
13
Views
1K
doriz
doriz
J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
503
jer_300Tdi_90
J
Back
Top