front brake pipe

[bustersbus]

trying to find the new part number for my front brake pipe ((drivers side). Had a look in the parts book and it says it's NTC5711 (from vin HA901222 upto vin 930434). Tried to google it and there's no results!!!
If there's no replacement part, will ah get away with makin' a new one up?

cheers

 

[stevieb42]

Classic Land Rovers

 

[bustersbus]

Classic Land Rovers

Cheers Stevie, but me Deutsch isnae up tae much

 

[stevieb42]

what bit do you want to know , an i`ll have a go at translating it for you

 

[bustersbus]

what bit do you want to know , an i`ll have a go at translating it for you

Nae need Stevie Ah'll probably pop intae the local Indie after work the morn tae get some prices for other bits and pieces, would've bin handy if ah had the new part number (if any!??!) though.

 

[stevieb42]

Nae need Stevie Ah'll probably pop intae the local Indie after work the morn tae get some prices for other bits and pieces, would've bin handy if ah had the new part number (if any!??!) though.

O.K., hoffen dein glückliches

 

[bustersbus]

O.K., hoffen dein glückliches

Danken

 

[stevieb42]

Danken

dein Willkommen

 

[bustersbus]

Beet Zeitrechnung als mich
Catch ye later

 

[stevieb42]

Beet Zeitrechnung als mich
Catch ye later

Patch time calculation as me .... eh

 

[bustersbus]

Patch time calculation as me .... eh

If ye were on the same translator as me, click the boxes above where ye type. It should've said 'bed time for me'
deffo goin' now, have fun

 

[stevieb42]

thats why i dont use a translator , see ya

 

[bustersbus]

Spoke tae the shop today and he said he'll knock me up one for about 4 quid, that'll do me

 

[stevieb42]

Spoke tae the shop today and he said he'll knock me up one for about 4 quid, that'll do me

result

 

[Griffdowg]

was it the flexi hose you were after?

NRC7874 Front brake hose

bit late now i know

 

[bustersbus]

was it the flexi hose you were after?

NRC7874 Front brake hose

bit late now i know

Nah, it was the metal one that connects to the flexi one Griff. Bin kinda lookin' at some of them braided jobbies, but need to get a few other bits and pieces first (ah'll probably end up gettin' them rubber ones!!) so's ah can finally get the rear axle swapped.
Cheers anyways

 

[Griffdowg]

rear axle? but your post says front? confused.com

anyway, for the solid pipe id buy the pipe flaring kit and a bundle of copper pipe and make yer own! i did a few bits for my front brake system, easy peesy!

G

 

[bustersbus]

rear axle? but your post says front? confused.com

the reason bein' is that when ah finally get me rear axle on, then ah can do ALL me brakes.
When ah was messin' about with me fuel pipe from the lift pump the other night, (cos it was leakin'!!!) ah noticed that the front brake pipe had some corrosion on it (hence the post).Goin' to swap the front calipers over from the white bus as they're pretty new, swap the rear pipes as well cos they're pretty new too, blow out all the old brake fluid and put new stuff in as ah don't know when it was last changed!

anyway, for the solid pipe id buy the pipe flaring kit and a bundle of copper pipe and make yer own! i did a few bits for my front brake system, easy peesy!

G

Ah only really need the one pipe Griff, cheers for that tho'