TD5 90 Project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Evening, I may have missed it but could you advise on which swivel kit you went for on the front? I need to do both fronts but wading through the typical names and unsure which ones the one to go for!
 
Evening, I may have missed it but could you advise on which swivel kit you went for on the front? I need to do both fronts but wading through the typical names and unsure which ones the one to go for!


Use this, register and enter your vin, then all the parts relevant to your vehicle are shown, they have excellent diagrams as well, then all the parts shown show prices from different suppliers,

https://www.lrworkshop.com

I tend to use LRSeries and island 4x4 for most stuff cos they have stick and price is good, and they deliver with DPD, cant be doing with my herpes or any other happy shopper delivery company.
 
Use this, register and enter your vin, then all the parts relevant to your vehicle are shown, they have excellent diagrams as well, then all the parts shown show prices from different suppliers,

https://www.lrworkshop.com

I tend to use LRSeries and island 4x4 for most stuff cos they have stick and price is good, and they deliver with DPD, cant be doing with my herpes or any other happy shopper delivery company.

thank you. No one likes herpes.
 
New vented brake discs all round,
Screenshot 2020-08-09 at 23.21.24.jpg
Screenshot 2020-08-09 at 23.21.16.jpg
 
Last edited:
Its that time again, and you will never guess who I saw on my way back after me truck passed its yearly exams, in a little village we call "bexleef" this morning scaring all the buses that were hiding in the in the bus station????

@bankz5152 any ideas?
:D:D

Anyway my emissions are getting better--rer!

Screenshot 2020-09-04 at 16.04.44.jpg
 
A Frame today.
Arm bolts - doddle
Castle nut CNUT

Side cutter? oh yea compressor fooked
Mini recip saw? - as above
Air hammer? - as above

:mad::mad::mad::mad::mad::mad::mad::mad::mad::mad:

Cold chisel + extreme violence = Done and Done :D
 
Last edited:
Nicely done! All these bits get so tired don’t they but your working your way through it nicely!! Did you go super pro bushes? I’m following behind you at the moment! I have a rumble still so doing output bearing on transfer and swapping wheels around in week just Incase it’s an alignment thing! Then I want to start bushing, bearings, swivels, brakes so similar tasks! Problem is, when the times there I just go fishing ha!
 
Back
Top