P38A Hex Key

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Lukas018

Well-Known Member
Posts
633
Location
Sussex
Morning I thought ordered correct hex key for the cover measured 18mm wide but hex key is 18mm but too big so I assume not measured side to side.

Attached photo of plug. Anyone know correct hex key size?
Thanks
 

Attachments

  • 1589797959030874717539430190274.jpg
    1589797959030874717539430190274.jpg
    75 KB · Views: 126
  • 15897979887502876125225969518078.jpg
    15897979887502876125225969518078.jpg
    115.1 KB · Views: 95
That is a 17mm hex. I had mine off a few weeks back.
Thank you I ended up knocking hex out and end that was in the socket fitted. It was advertised as 18mm hex but turned up 20mm wide with and 18mm socket. Must of ready it wrong but as was a bit misleading.
 
Morning I thought ordered correct hex key for the cover measured 18mm wide but hex key is 18mm but too big so I assume not measured side to side.

Attached photo of plug. Anyone know correct hex key size?
Thanks

Got a feeling I used a bolt with a couple of nuts on it. Put the bolt in the hole with the 2 nuts so you can turn it.
 
Back
Top