Swivel pin bolt size

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Galladog

Well-Known Member
Posts
632
Location
Alloa
Evening all, my TD5 lower swivel pin has excessive play in it so I ordered a rebuild kit.
The lower swivel pin bolts part BH108061M are rusty as hell so I thought I would replace these, the manual says they are M8 but gives no length, anyone know the length ?
Also are they any type of special bolt or just standard M8 ?

Cheers Galladog
 
Not sure about grade of bolt, but the go right through housing. I might have some on shelf in garage! Watching Barca game, 15 mins until half time. Will have a look then.
 
35mm
IMG_1602.JPG

10.9 grade
IMG_1603.JPG

Reckon mine are M10
IMG_1604.JPG

If you're taking one out, make it a top one.
 
Thanks for the replies guys.
The manual I have is the genuine parts catalogue ( STC9021CC )
Diagram E22 part no 14, BH108061M is listed as " Bolt-hexagonal head M8".
 
Thanks for the replies guys.
The manual I have is the genuine parts catalogue ( STC9021CC )
Diagram E22 part no 14, BH108061M is listed as " Bolt-hexagonal head M8".
Hmmm, could be a Haynes misprint?
Edit
Oo , sorry. googled that number hand Gaynes came up. Missed the bit where you said it was genuine parts catalogue. That'll be the 1664 :rolleyes:
 
Last edited:
Sorry I got all confused never read your post properly Yeah the bottom pin bolts are M8 still 10.9 I believe as part of the steering and suspension.The tops are M10 and the bolts that connect the swivel to axle are M10. If your in Alloa it may be worth giving Gemm 4x4 a call they might have them in stock and they are only in Larbert,Falkirk. 01324 557735 is their number.
 
Back
Top