Disco 2 ABS and TC lights after mud plugging

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Si Click

Well-Known Member
Posts
1,503
Location
Lincolnshire
The D2 has been seeing some mud over the last couple of days - nothing extreme, but enough that CDL was needed and HDC going down some steeper slopes. Twice now on restarting the TC and ABS lights remained on. In each case after a couple of hundred yards I stopped, restarted and they did not reappear.
I'm guessing it was just something like crud washed into the sensor ring, but I've not seen it before. Is it normal?
 
CDL was needed and HDC going down some steeper slopes. Twice now on restarting the TC and ABS lights remained on
On early modells the ABS/TC lights are coming on after ignition if the CDL was engaged and they recycle with ignition once the CDL is disengaged, it's explained in the WSM at the transfer box description
 
On early modells the ABS/TC lights are coming on after ignition if the CDL was engaged and they recycle with ignition once the CDL is disengaged, it's explained in the WSM at the transfer box description

That will be the reason. Each time it occurred I was restarting with CDL still engaged. Good to know it was normal and not a harbinger of imminent amigos.
Thank you SF.
 
Back
Top