swivels

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bongo1

Active Member
Posts
462
Location
MACCLESFIELD cheshire
DEF90 300tdi 1996 , My front diff oil is contaminated with i assume one shot grease , which im told is no big deal .
Now i want to check and top up the swivels , i have i believe the earlier hubs with fill + drain + level bungs . (is that correct on a 96 ?) . Anyway lets assume the seals have gone and the one shot has got to the oil , Do i need to check and topup the swivels . ? or are they topped up already with diff oil .
ta gerry.
 
Fill on the top

DSCN0989.JPG


Level bung under the lock stop bolt

DSCN0990.JPG


Drain plug at the bottom.

DSCN0997.JPG
 
That's the one . With the grease i guess getting into the diff oil , I assume that i will still need to topup/check the swivels .
When were the hubs changed to ones without a drain .
 
As mines an early 96 , so that sounds about right , mine are chrome and have the 3 ports . I wondered if the hubs had been changed for very early ones , and that i should of had the single fill only ones .
 
The level was very tight to get a spanner on , I wanted to remove the wheel lock stop bolt , but changed my mind as tight and felt like it would snap off , some serious heat required but i don't have O/A only mapp , let the garage have that headache .
 
The level was very tight to get a spanner on , I wanted to remove the wheel lock stop bolt , but changed my mind as tight and felt like it would snap off , some serious heat required but i don't have O/A only mapp , let the garage have that headache .

Lock stop bolts have a locking nut behind them so you have to undo that first.
 
Lock stop bolts have a locking nut behind them so you have to undo that first.
Hi dieseldog69 , your totally right as normal . Im ashamed to say that when i actually had a proper look i spotted the lock nut DOH , ever-likely it would not move . But in my defence my old 90 had the lock nut on the other side (not on the back) , and why i thought it was simply missing on this one . Maybe the old 90 had the lock nut fitted on the wrong side ?? .
 
Back
Top