Thermostat advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi I've got a 2.5 v6 freelander 1is there any manual to tell me how to change the thermostat as the only manuals say not for v6 any help would be appreciated
Have you considered putting a back up thermostat in the top hose. It is a recognised fix and is so easy to do. It is well documented on here with plenty of good pics. I did it recently and it works great.
 
Hi I've got a 2.5 v6 freelander 1is there any manual to tell me how to change the thermostat as the only manuals say not for v6 any help would be appreciated

Why do you need to change the thermostat?

Rave will have the necessary information.

It's a 4 hour job, more if you need to extract it from the block and make good any sealing faces.

It's possible to do DIY, but you need to know the KV6 well, or strip the engine down methodically, labelling every wire and pipe.
 
Why do you need to change the thermostat?

Rave will have the necessary information.

It's a 4 hour job, more if you need to extract it from the block and make good any sealing faces.

It's possible to do DIY, but you need to know the KV6 well, or strip the engine down methodically, labelling every wire and pipe.
Hi I'm new to all this but my fan looks like it's been rewired and runs 90 % of the time and its bloody loud someone said it's probably because the thermast isn't working so they make the fan run more
 
Thermostats usually fail in the open position, in which case it would run cold. If it failed in the closed position then it would overheat. Regardless how long the fan operated.
What does the dash say?
 
Hi I'm new to all this but my fan looks like it's been rewired and runs 90 % of the time and its bloody loud someone said it's probably because the thermast isn't working so they make the fan run more
How do you know the fan has been rewired? It's speed is controlled by the engine ECU, so isn't easy to mess with, unless the control unit has been bypassed.

If the engine is running hot, then the fan will run more than it should, but you need to check the engine temperature on the OBD2 live data to prove actual engine temperature.

In my experience, the cooling fans of the KV6 do run quite a lot. The engine makes lots of heat, as does the gearbox. This heat is removed by the radiator, assisted by the fans.
Thermostats usually fail in the open position, in which case it would run cold.
Not on the KV6. The wax capsule normally leaks its wax, preventing the thermostat from opening. ;)
 
It seems I have a lot to learn you're all so helpful thanks for all the advice. I obviously need someone close to get lessons from

The KV6 Freelander can be a mine field to look after.

But if you want to learn, or want someone who knows them to take a look, then I'm in Cornwall. ;)
 
Hi mate where in Cornwall are you
upload_2019-4-26_20-42-18.png
 
Back
Top