Diff guards and corrosion.

[Bushtoy]

wot about an old fooked acetylene or oxy bottle, they aboot 8 inches

 

[Bushtoy]

why? i could just ask daft and save meself the bother of looking it up on babelfish. or do you lack the cerebal capacity to think about asking the author wot ee meant?

i know wot ee ment......tis in me 'ome language cerebral slob

 

[slob]

i know wot ee ment......tis in me 'ome language cerebral slob

just aswell i dint do the babelfish thing then. i'm sure they don't have an 'utter bollocks' section

 

[slob]

how about asking the bloke wot's done it where he got his from?

 

[Pikey]

reet then all yu landy n drainage expurtz - where can yu get an 8" steel sewer pipe cap from then?

Pipe fitter & fabricators You tend to find then on Petrochemical site oil refinaries and the like. I doubt you'll find a steel sewerage pipe supplier in the UK but most Big pipe fitting outfits will be able to get you one.


Or as SlobMeister says head for merkin land.

 

[The Mad Hat Man]

statin the obvious - it was in afrikans, or more precisely, dutch - so it was meant fur Bushbollock. I take yo point about the dollar tho, Slob. I mite have to find out how much.


anyone have a copy of LRO - spring 2007 - there is a write-up in there, apparently, on a RR diff pan how-to.

 

[Bushtoy]

anyone have a copy of LRO - spring 2007 - there is a write-up in there, apparently, on a RR diff pan how-to.

ek het een, maar ek sal dit liewers aan die brand steek foordat ek dit aan JOU gee, jou ou bosvark boknaai!!

 

[The Mad Hat Man]

heres a couple of links to a piccy how-to. Unfortunately its Merkin, but it shows wot to do.

part1

part2

although this site mentions cutting the cap, others dont. meybe you do in the front diff, to clear the rod. The bax has no clearance issues.

 

[The Mad Hat Man]

ek het een, maar ek sal dit liewers aan die brand steek foordat ek dit aan JOU gee, jou ou bosvark boknaai!!

 

[Bushtoy]

damn...3/8" thick......armoured diff....brilliant!

 

[The Mad Hat Man]

Steel & Aluminum Pipe Caps / End Caps / OD Caps.

Quick update - these are only 12AWG wall thickness, but then only $3.75ea.F.O.B. Ohio

 

[Pikey]

Nah there ****e. They're just dust/debris protectors for when the pipes are been transported. If you look on the thread you posted the link to and read down there's the ANSI spec no. and some info on where to locate the cap also known as weld caps in this country.

 

[landrover901989]

I use my landy for laning put it through some serious sh1t, been meaning to get a diff guard as i have already welded up the front axle as the diff pan had slightly cracked at the bottom where it had bent.

looking at the problem you guys are having with rusting behind the diff guard im gonna seam weld plate onto the front of the diff....

as for paint i highly recommend agricultural tractor paint, hard as nails water proof. better than hammer right.......

another job to do when i get round to it...lol.....

 

[The Mad Hat Man]

found a source of pipe caps in the UK - about £40 each - wall thickness .320" - thats wot I am going with - fix the prob once and fur all.

Butler Valves and Fittings Ltd
81 Gravelly Ind Park, Birmingham, England
Tel 0121 328 4333 Fax 0121 328 4555
www.butlervalves.co.uk

 

[The Mad Hat Man]

the thread is on the diff filler/drain plug is 3/4 NPT.

 

[The Mad Hat Man]

eres some piccies of the new pan before fitting fur ya....

 

[Trewey]

is yer doin bofe or jist the front won daft?

 

[The Mad Hat Man]

just the rear one - coz thats the worst - burri gorra "spare" one fur later

 

[The Mad Hat Man]

Hers a couple more ideas...