What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Driven it on a loop of Dartmoor, stopped off to walk the mutt and for a brew at the Fox Hound Cafe in Princetown ...:)
upload_2018-12-2_17-34-14.png
 
Last edited:
Removed the cracked windscreen. Attempted to fit the new one ( with cord, suction cup and another person), and can't even get the new rubber to stay on the new screen. Considerably depleted the world supply of swear words in trying to make the damn thing work.

Put old windscreen back as the sleet started, and am looking forward to driving to a garage tomorrow with a windscreen held in by gaffer tape....
 
rod looks to be too far in, how come your changing the slave, a leak?
Loss of clutch initially, whilst out laning. Removed wading plug and brake fluid ran out. I am changing the complete system as I would rather rely on something I have done :)
Do you think I may have a release arm problem too?
Cheers
 
I have just spent two hours fighting with the clutch pedal box..... sad to say it has won and I have left it where it is and walked away o_O
Why make the hole smaller than the pedal? With everything around it, I just can't rotate it to come through the floor :(
If there is a trick to it, please tell me :confused: :D:D
 
@My Old Landy pedal box should come up then turn pedal to get out hole. Ensure no fluid so pedal moves freely may help.

Why you taking the pedal box out?
You can just replace the master .;)
I tried but I couldn't get the master out :( then I drained the fluid but can't get the pedal rotated to get it through the slot....
I will try again Wednesday :)
 
Refitted the stripped out Dash with proper screws, removed a mile of dodgy wiring, a Nokia hands free box, a Blaupunkt Bluetooth Control unit and a dead alarm system. Found a pencil, some air rifle pellets and £3 in change behind the centre console. Looks better with less rattles, holes and dog hair.....

Next
 
Back
Top