Trans Failsafe Prog

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Yampy1

New Member
Posts
1
Location
Walsall
Hi, got the dreaded trans Failsafe prog message. It only comes on when I take it out of park, but if I put it into neutral turn the engine off then restart the car it clears and drives perfect. I’ve had it checked for codes and none are showing. Sorry it’s a 4.4 ltr l322 Vogue on a 53 plate HELP!!!
 
Hi, got the dreaded trans Failsafe prog message. It only comes on when I take it out of park, but if I put it into neutral turn the engine off then restart the car it clears and drives perfect. I’ve had it checked for codes and none are showing. Sorry it’s a 4.4 ltr l322 Vogue on a 53 plate HELP!!!

Welcome, you should ideally be looking to the fellas in the Range Rover boards for help.
 
Welcome to LZ. Dreaded Trans Failsafe Mode! We've all been there at some point. If you have no error codes then perhaps it's just picking up over revs during the changes. My 4.2 has been throwing this error message up due to sticking solenoid between 3rd and 4th. Try driving in manual and see if you can detect when the error is triggered. Then search in the Range Rover forum for specifics. Good luck.
Tricky.
 
Back
Top