Hi, got the dreaded trans Failsafe prog message. It only comes on when I take it out of park, but if I put it into neutral turn the engine off then restart the car it clears and drives perfect. I’ve had it checked for codes and none are showing. Sorry it’s a 4.4 ltr l322 Vogue on a 53 plate HELP!!!
Trans Failsafe Prog
- Thread starter Yampy1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Welcome, you should ideally be looking to the fellas in the Range Rover boards for help.
landyzoner
Well-Known Member
- Posts
- 1,441
- Location
- Birmingham
welcome to the forum 
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
Range rover forum ya yampy get!
Ee am
https://www.landyzone.co.uk/forum/range-rover.10/
Whereabouts in Walsall you unlucky enough to be from old pal? Wife's family is from blakenhall/Leamore we're only down road from you towards wolves.
Have a look here my mate https://www.landyzone.co.uk/land-rover/midlands-meet.335251/
Ee am
https://www.landyzone.co.uk/forum/range-rover.10/
Whereabouts in Walsall you unlucky enough to be from old pal? Wife's family is from blakenhall/Leamore
we're only down road from you towards wolves.Have a look here my mate https://www.landyzone.co.uk/land-rover/midlands-meet.335251/
Tricky of York
Well-Known Member
- Posts
- 623
- Location
- York
Welcome to LZ. Dreaded Trans Failsafe Mode! We've all been there at some point. If you have no error codes then perhaps it's just picking up over revs during the changes. My 4.2 has been throwing this error message up due to sticking solenoid between 3rd and 4th. Try driving in manual and see if you can detect when the error is triggered. Then search in the Range Rover forum for specifics. Good luck.
Tricky.
Tricky.
