P38A Diesel #4 injector

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Grrrrrr

Technician, Bodgit & Scarper Ltd
Full Member
Posts
18,914
Location
Buckinghamshire, UK. ('95 DT)
'95 DT.

The #4 injector has decided to leak. PITA. Sourced one but can someone remind me if I need a special tool to get the f*cker on without damaging it? Is there some sort of socket with a window, IIRC?
 
I have one of these.....

Sockets.jpg


Which has a 27mm x 85mm deep windowed injector socket on a 1/2" drive included....(as well as a 27mm shorter socket (74mm) for oil senders)

Welcome to borrow - will have to get it out of the 110 (which is in Farnborough at the moment - won't be able to get to it until Thursday when I am back in the office) but measure the depth first as the 27mm is only 85mm deep.
 
27mm x 85mm is fine. Used one when I changed engine in the be atch. Welcome to borrow it but probably won't get it for a couple of days due to royal snail mail. Unless your anywhere near Accy.
 
Back
Top