1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

P38A Diesel #4 injector

Discussion in 'Range Rover' started by Grrrrrr, Apr 16, 2018 at 4:26 PM.

< Previous Thread | Next Thread >
  1. Grrrrrr

    Grrrrrr Well-Known Member

    Joined:
    Jul 8, 2012
    Posts:
    8,238
    Likes Received:
    1,046
    Location:
    Buckinghamshire, UK. ('95 DT)
    '95 DT.

    The #4 injector has decided to leak. PITA. Sourced one but can someone remind me if I need a special tool to get the f*cker on without damaging it? Is there some sort of socket with a window, IIRC?
     
  2. stemac33

    stemac33 Active Member

    Joined:
    Apr 22, 2012
    Posts:
    227
    Likes Received:
    39
    Location:
    Accrington, Lancs
    Yes you can get them from most motorfactors 27mm I believe. Hth
     
    Grrrrrr likes this.
  3. Grrrrrr

    Grrrrrr Well-Known Member

    Joined:
    Jul 8, 2012
    Posts:
    8,238
    Likes Received:
    1,046
    Location:
    Buckinghamshire, UK. ('95 DT)
    Better if I could cadge one for the day. @EntropyUK , did you do yours a while back?
     
  4. Saint.V8

    Saint.V8 Dyed-in-the-wool 100% RR Junkie

    Joined:
    Apr 27, 2008
    Posts:
    14,599
    Likes Received:
    959
    Location:
    Surrey - Near the middle, close to some green bits
    I have one of these.....

    Sockets.jpg

    Which has a 27mm x 85mm deep windowed injector socket on a 1/2" drive included....(as well as a 27mm shorter socket (74mm) for oil senders)

    Welcome to borrow - will have to get it out of the 110 (which is in Farnborough at the moment - won't be able to get to it until Thursday when I am back in the office) but measure the depth first as the 27mm is only 85mm deep.
     
    Grrrrrr likes this.
  5. stemac33

    stemac33 Active Member

    Joined:
    Apr 22, 2012
    Posts:
    227
    Likes Received:
    39
    Location:
    Accrington, Lancs
    27mm x 85mm is fine. Used one when I changed engine in the be atch. Welcome to borrow it but probably won't get it for a couple of days due to royal snail mail. Unless your anywhere near Accy.
     
  6. Grrrrrr

    Grrrrrr Well-Known Member

    Joined:
    Jul 8, 2012
    Posts:
    8,238
    Likes Received:
    1,046
    Location:
    Buckinghamshire, UK. ('95 DT)
    Thanks, chaps. I'm going to ask around and see what I can find but I might take you up on it yet.

    How much was that kit, @Saint.V8?
     
  7. Saint.V8

    Saint.V8 Dyed-in-the-wool 100% RR Junkie

    Joined:
    Apr 27, 2008
    Posts:
    14,599
    Likes Received:
    959
    Location:
    Surrey - Near the middle, close to some green bits
    £23-25 I think..... Ebizzle special, but I have yet to break any of it!
     
    Grrrrrr likes this.
  8. Grrrrrr

    Grrrrrr Well-Known Member

    Joined:
    Jul 8, 2012
    Posts:
    8,238
    Likes Received:
    1,046
    Location:
    Buckinghamshire, UK. ('95 DT)
  9. stemac33

    stemac33 Active Member

    Joined:
    Apr 22, 2012
    Posts:
    227
    Likes Received:
    39
    Location:
    Accrington, Lancs
    Yep that's the one.
     
< Previous Thread | Next Thread >