300 Tdi Rebuild

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Looks like I need a breaker! Having said that, you must mean a long, strong, tubular bar that will fit over a socket wrench.
No, A tube over a ratchet will strip and kill your ratchet...the forces required to both undo the crank bolt and then do it up again ,will kill it! A decent breaker bar is worth its weight in gold...esp. for the head bolts too...

Your thinking of a cheater bar!
image_25949.jpg
 
No, A tube over a ratchet will strip and kill your ratchet...the forces required to both undo the crank bolt and then do it up again ,will kill it! A decent breaker bar is worth its weight in gold...esp. for the head bolts too...

Your thinking of a cheater bar!
image_25949.jpg
Well, I'm learning all the time. Googled them before after neilly's post.

This sort of thing EBay
I'll have to go 1/2" or get an adaptor.
 
What's everyone's thoughts on a 30" (760mm) breaker bar? Long enough to pull down the head bolts and crank pulley nut?

EDIT
Or, should I be looking for one a metre long? Not many with a 1/2" drive
 
What's everyone's thoughts on a 30" (760mm) breaker bar? Long enough to pull down the head bolts and crank pulley nut?

EDIT
Or, should I be looking for one a metre long? Not many with a 1/2" drive
2 ft bar is all you need for head bolts , decent 1/2 inch batter gun does crank bolt or a tube on the 2ft bar
 
Back
Top