would somebody be able to tell me how to repair (!) the rear view mirror compass. i already tried to drive it in circles with a "C" in the mirror display and aslo had it on zone 8, suposedly the zone for southern europe, all to no evail.the "C" is still the only signal i get to at least be with current in the display.
hello my name is thomas with a discovery td5 series 2
- Thread starter tmjl
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
FYI,
@biggeeeee , which year did that write up come from? as interestingly the speed is different in the 02 MY owners manual.
Sections from the manual.
Cheers
@biggeeeee , which year did that write up come from? as interestingly the speed is different in the 02 MY owners manual.
Sections from the manual.
Cheers
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
dear Neilly, thank you but first in my owners manual there is no list of the 15 regions and which one is for spain. in the repair manual all i get is the usual stuff of driving around in circles slowly...etc, etc. the "c" does not go away and i need to know if anybody was able to look at the circuit board or the magnet itself housed in the stem of the mirror.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Hi Thomas,
Sorry I have never looked at the circuit board, the only info I have is what is in a copy of the owners manual which I have downloaded and is in the attachment above.
Have you changed the zone to the correct one? Also as you can read the two attachments from myself and @biggeeeee show different speeds for the driving in a circle
Cheers.
Sorry I have never looked at the circuit board, the only info I have is what is in a copy of the owners manual which I have downloaded and is in the attachment above.
Have you changed the zone to the correct one? Also as you can read the two attachments from myself and @biggeeeee show different speeds for the driving in a circle
Cheers.
yes Cheers, i did drive in circles around a round about here to the amazment of some people looking on. i do have the same remark on calibration you posted in my big fat owners manual but never ever did i find anything on which zone corresponds to which number let alone a map. i would hate to replace the mirror simply because one little tiny ítem on the circuit board or else is not attended to. there most be a way...
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
@tmjl
As per the PM, have you looked at the posts numbered #3 and #4, one is from biggeeee showing the rave manual description, the other is from the 02 MY owners manual.
If you do not have these then you can download them by going to this post and using the link
Post number#2 should give you the link.
https://www.landyzone.co.uk/land-rover/uk-rave-manual-for-the-td5.311150/#post-3921725
Cheers
As per the PM, have you looked at the posts numbered #3 and #4, one is from biggeeee showing the rave manual description, the other is from the 02 MY owners manual.
If you do not have these then you can download them by going to this post and using the link
Post number#2 should give you the link.
https://www.landyzone.co.uk/land-rover/uk-rave-manual-for-the-td5.311150/#post-3921725
Cheers
