ACE fluid

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Tillytomp

Active Member
Posts
585
Location
Hampshire
Guys,
The fluid for the ACE is slightly low so wanted to top it up.
trying to make sence of all the stuff on the net about "OATs" ect cet, so through i would post on here
anyway is this the correct stuff
Texaco 14315 Cold Climate Fluid,
Land Rover Part # LRN-2261.

cheers :D
 
Guys,
The fluid for the ACE is slightly low so wanted to top it up.
trying to make sence of all the stuff on the net about "OATs" ect cet, so through i would post on here
anyway is this the correct stuff
Texaco 14315 Cold Climate Fluid,
Land Rover Part # LRN-2261.

cheers :D

Probably already know this:
If it is low it surely means it is leaking?

The difference between my ACE when it was not leaking was enormous.
It is worth fixing before it gives trouble, make sure it is topped up, it cost me an ACE pump when my ran dry. :)
 
cool:cool:, i will get some and top it up, and then go from there,
did i read right that the valve block is underneth the floor of the drivers seat?, might have a quick look just to be sure
 
cool:cool:, i will get some and top it up, and then go from there,
did i read right that the valve block is underneth the floor of the drivers seat?, might have a quick look just to be sure
Yes it is, if it is leaking I highly recommend to mod it to regular hydraulic pressure fittings.
Don't waste your time with the Land Rover o-rings connection it is just crap.


4th post in this link:

http://forum.difflock.com/viewtopic.php?p=519819&sid=7b0d7e0e3213a9f88856075459b0c612

I done that in mine. it cost me £80
 
OK, so you get the valve block machined to except the new hydraulic fittings, no worries with that as my mate works with cnc's etc, but do the lines just re-attach ?
 
Oh OK, I have some pas fluid , so shall top it up with that, and will then pick some more up next time I'm at the local landy shop(might get an account ) as ownership is expensive :D
 
I have Dextron III in mine, no issues so far. Mine has been completely empty before I put that in though. The other fluid is hard to come by here and after the hassle I had I opted for something that I could fill up everywhere. Ironically that has not been needed after the mod to pressure fittings.
 
[GALLERY=] 20161101_210335.jpg [/GALLERY]
 

Attachments

  • 20161101_210335.jpg
    20161101_210335.jpg
    215.2 KB · Views: 245
That is dextron III

It will do the job. How bad is the leak? I had to fill mine every 2 days in the end. I forgot one day and burned my pump out.

If it isn't leaking to bad I would get the proper stuff, although I know of a lot of people with Dextron III in it who had no problem and have been using it for years.

I just don't like mixing oils, myself but know people who have done that without an issue
 
I'm not sure if the ace is leaking or not yet, the pas is a bit , I guess I top that up once a month , (it's still within its min/max)
 
Back
Top