Small bore spill pipe

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rodntod

Active Member
Posts
607
Location
ayrshire scotland
Evening all,
Can anybody tell me where i can get decent spill pipe,as the widely available 3.2mm ID stuff is just not snug enough .

Thanks in advance
Ed
 
I had that problem ended up useing small cable ties abit of a fiddle useing snipenose pliers and small screwdriver to tighten them on but worked, and i allready had the ties.
 
Get proper 1/8" spill pipe from a motor factors and not the ****e off Ebay. The spill nipple cone is 4 mm in diameter proper spill pipe will never come off. If you remove spill pipes you MUST shorten them slightly to form a new seal area. As the seal area will be damaged on removal and the pipe will leak. Or fit new pipes.
 
Back
Top