I think I have found my starting problem its the glow plugs.
I removed them and tested each one and they work perfectly glowing nicely in about 5 seconds.
I then refitted them and put a meter on them and nothing??
Tested the supply wire and its giving only 3.9v for about 8 seconds then switches off as it should and if I connect it to the first glow plug and try again it goes to -00.00v
After searching previous threads I think I found the relay behind the drivers foot panel and thats clicking as is the timer relay when the ignition is switched on.
Any ideas why I am only getting 3.9v then -00.00v and how to trace the fault.
I removed them and tested each one and they work perfectly glowing nicely in about 5 seconds.
I then refitted them and put a meter on them and nothing??
Tested the supply wire and its giving only 3.9v for about 8 seconds then switches off as it should and if I connect it to the first glow plug and try again it goes to -00.00v
After searching previous threads I think I found the relay behind the drivers foot panel and thats clicking as is the timer relay when the ignition is switched on.
Any ideas why I am only getting 3.9v then -00.00v and how to trace the fault.