Transfer box seal identification

[landowner]

Looking at seals for transfer box, only need the one as its a nice dry box.

I want to replace the seal that the output shaft from the gearbox goes through, is it called an input shaft seal or a mainshaft seal please

appreciate the information so as I get the correct one

 

[Southernlandy]

I think the one you're after is the mainshaft oil seal FRC2365 which has been superseeded by ICV100000.

Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER
Number 12 on the diagram?

 

[jamesmartin]

it is ivc100000 good idea to lightly smear outer side of seal where it locates in box

 

[landowner]

it is ivc100000 good idea to lightly smear outer side of seal where it locates in box

Thanks I will, the old one was weeping slightly but not leaking, I'll put new one on with the R380
No oil leaks expected then

 

[landowner]

I think the one you're after is the mainshaft oil seal FRC2365 which has been superseeded by ICV100000.

Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER
Number 12 on the diagram?

Wonder why its called mainshaft seal? I would have thought input seal

 

[jamesmartin]

it is when its used for the t/box but same seal is used as rear mainshaft seal on an lt77 and lt85 hence some use that name

 

[Southernlandy]

That part number is for an LT77 but is it the seal on the transfer box or gearbox that you want changing?

 

[landowner]

That part number is for an LT77 but is it the seal on the transfer box or gearbox that you want changing?

Its for the transfer box, just bought a full set of seals and gaskets cheap enough so can replace anything that looks dodgy.

Just hope that the 'brilliant' gearbox that I bought is all that the man said it was, some people think that because it runs and the gears change then its a good gearbox

Time will tell, not swapping it for a bit yet just dont have the time