SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
One of my spark plugs was really really tight I think it has been over tightened and has ####ed the thread. What should I do?
the plugs in the head for a start
You could remove the plug and helicoil, head will want to come off to stop swarf though
Repair Spark Plug Hole Without Removing Cylinder Head.mpg - YouTube
Videos like that on youtube, just have a look and find one you can understand
Kits not much either although you could just buy a new head for £20 or in my case 99p![]()
Expert M14 X 1.25 Spark Plug Helicoil Thread Repair Kit £56.18
Piston TDC a shop vac to suck drilling chips, re thread easy pezzy![]()
garage will charge you a decent bit I'd think mate, may be worthwhile going for LZIR for a helping hand
Break it down for parts I'd say, wont get much for a V8 as whole looking at ebay prices
Head off then?![]()
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!