THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
tow bar steps..
- Thread starter MoorlandBOB
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MoorlandBOB
Banned
- Posts
- 1,584
anyone know where to get these?
MoorlandBOB
Banned
- Posts
- 1,584
yep i did like the look of those but i think on view its gunna get trashed.im gunna weld a tractor step on...
jai_landrover
Well-Known Member
- Posts
- 13,408
- Location
- Luton
Www.bull****cagesandbling.com hehe
MoorlandBOB
Banned
- Posts
- 1,584
lol yep but its a nice roof rack i could hang **** on etc...i doubt it would be very effective but it would carry a big gate on the side....bit like the window fitters vans..
- Posts
- 8,543
- Location
- Tamworth, staffs.
anyone got anything nice?
seen a few about from 30quids upwards.......has to be black lol..
Ffs just get some step ladders grandad.
ound:
Boris113
Well-Known Member
- Posts
- 1,356
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
They're ****e and fold like tissue paper..
- Posts
- 45,215
- Location
- Hornchurch
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
Ive got the single sided galv version of that, not knackered it yet, did bend it a touch reversing a large trailer, but not knackered it off road (yet!!)
when i get the towing sockets moved to the Xmember, ill remove it when im off the beaten track.
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
Theyre the ones i kept bending cos i cant drive
just remove mine when it goes offroad,just pull out the split pin,did forget the other day mind and bent it a bit
MoorlandBOB
Banned
- Posts
- 1,584
MoorlandBOB
Banned
- Posts
- 1,584
Theyre the ones i kept bending cos i cant drive
lol yep i see..
sized up the tractor step today when painting the roof,
bit of wacking and drilling and it will be bolt on.....
MoorlandBOB
Banned
- Posts
- 1,584
yeah that works but i use a clevis pin hitch off road alot so im gunna fit it to the cross member.ill post pics ..
MoorlandBOB
Banned
- Posts
- 1,584
well the tractor step is just too big at second viewing so i used 2 brackets and a bit of angle iron....
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
MoorlandBOB
Banned
- Posts
- 1,584
still looks like it will get slippy.
yep i did wonder...i may cut the step plate out of the tractor step and fit it over if so..
- Posts
- 8,543
- Location
- Tamworth, staffs.
FFS its only about 2 inches lower than the rear door on yer motor. :doh:
I thought you wuz on about fitting a proper step thing thats between the floor and the rear door.
Whats the point in that?
MoorlandBOB
Banned
- Posts
- 1,584
FFS its only about 2 inches lower than the rear door on yer motor. :doh:
I thought you wuz on about fitting a proper step thing thats between the floor and the rear door.
Whats the point in that?
so when the tub is full i can step up and onto the tool box
also its not a height issue i have but just somewhere to step other than the towball
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
so when the tub is full i can step up and onto the tool box
also its not a height issue i have but just somewhere to step other than the towball
put some chequer plate on it??
