1995 4.6 V8 Airbag Fault message

[Taximan2011]

Hi guys any advice.

As you know I bought a non runner P38 as a project. Thanks to you people on here I have it running and have solved many issues.
The current fault is dash saying airbag fault.
I have changed all 4 airbags.
Last job I did was to clear my select neutral fault found TB ecu fried so changed that yesterday together with TB motor. Battery has been on and off recently.

Anyone suggest an easy fix to clear fault on display

 

[Datatek]

First check if one of the 2 SRS bulbs has failed, if one is faulty the other will light. Low battery voltage can also trigger a fault but the only way to re-set is with diagnostics.
You wasted your money on the side airbags, they are worse than useless.

 

[ovalandrover]

Check connection under passenger seat

 

[Taximan2011]

Ok thanks

 

[Taximan2011]

2 SRS lights ? I have a message saying airbag fault and I have a red SRS bulb lit

 

[aj1954]

Does the horn work? do the other buttons on the steering wheel work? if not could be the rotary coupler, it was on mine.

 

[wammers]

When you say you have changed all four airbags you mean the suspension airbags. Airbag fault has nothing to do with those. It is an SRS fault and there are only two of those in your car driver and passenger airbags. As Data says check both warning bulbs are sound. Then check yellow plug into instrument panel. Then it's rotary coupling. Or it may just need a fault clearing with diagnostics. Diagnostics will give more info as to which part is at fault, and is the quickest way to sort it.

 

[Taximan2011]

Thanks Will nanocom diagnose it ?

 

[wammers]

Thanks Will nanocom diagnose it ?

Yes should do.

 

[dogsbody]

Hiya Taxi
I've got my Nano back from Fraggle so if you need to borrow it give me a bell.

 

[Taximan2011]

Hi dogsbody you read my mind. Decided to undergo a copy of your dash conversion white dials so may be worth doing after that incase I disturb anything whilst there.

 

[dogsbody]

Hi dogsbody you read my mind. Decided to undergo a copy of your dash conversion white dials so may be worth doing after that incase I disturb anything whilst there.

Bleedin' copycat.
Have you thought of putting the wood surround on the dials whilst you're in there? Andy (R.R.B.) might have one lying around.

 

[Taximan2011]

No I hadn't as my dash is all grey plastic would look odd