Gearbox oil?? crunching gears.

[pimpinthepidge]

Hi peeps need a little help pleeeaaassseee.
I have read the posts on gearbox oil... mtf 94 dextron 3 etc...
My story starts as the gearbox was alittle cruchy i decided to change the oil, bought some from a landrover specialist in a unstickerd tub, changed oil and noticed a differance. There was a lot of milky white stuff decided to change again to clear it all out. Called at euro car parts and they recommended this

put the oil in yesterday and its seemed worse.
Called at the local autofactors today and they recommended this

Are any of these anygood??
The one i picked up today does say MTF 94 and he shown me on computer that it was recommened.
Cheers....

 

[discool]

80w90 is gear oil to use to your transfer box and axle diffs, you require manual transmission-fluid MTF for your gearbox. ATF for autos... The 10w40 semi-synth is OK for your engine.

 

[Paulmitchell1984]

is dextron 2 any good for gearboxs?

 

[pimpinthepidge]

Thanks pal, so i need to get the proper stuff from land rover, cos nobody seems to know round here.

 

[jamesmartin]

is dextron 2 any good for gearboxs?

yes ,its fine

 

[truckerdan]

I used mtf 94 in mine lodexol by Morris lubricants and is fine .

 

[discool]

Thanks pal, so i need to get the proper stuff from land rover, cos nobody seems to know round here.

All major oil companies now do an MTF, MTF94 is a Texaco product

What engine oil? Which is the best engine oil for my car? | Castrol UK
AMSOIL Manual Synchromesh Transmission Fluid 5W-30

 

[Steviecops]

I recently changed my gearbox oil. The oil I drained out was ATF and I replaced it with MTF 94, which was like treacle in comparison. Now, on cold mornings, until the motor has warmed up, my gear changes are a bit notchy, especially first to second. Once everything is up to temp it's really smooth.

 

[Farrar]

I recently changed my gearbox oil. The oil I drained out was ATF and I replaced it with MTF 94, which was like treacle in comparison. Now, on cold mornings, until the motor has warmed up, my gear changes are a bit notchy, especially first to second. Once everything is up to temp it's really smooth.

I have the same problem with mtf94. When its frosty oil needs time to warm up otherwise second gear is near impossible to find. Same as you once warm its as smooth as a defender box can be.