Search results

What componants do I need to fit Cruise to my '99 300TDI auto. Has anyone done this? cheers Lockie

Hi all, My 300TDi is due for a new set of shoes. What I would like to know is, to you guy and girls that have Discos WITHOUT ABS, which All Terrain Tyres stop best on Tarmac in the wet as I have had a few brown trouser moments trying to stop. Currently I have 205 r 16 AT Khumo's which are...

Hi all, I have a 300TDI auto at lowish speed going on/off the throttle I'm sure I can here the gearbox or the transfer box making a clonking noise.I've checked the hardy spicer joints(and greeced) and fitted a new rubber joint on the rear prop. and still it does this. When the rear prob was off...

Does anybody have a seatbox/base for sale for my seriesIIa that is reasonably local to Windsor berkshire.I've looked on Ebay and when they do come up they are either to expensive or miles away. I chopped big holes in my seat box to fit black electric leather seats(from a Granada Scorpio) all...

my tdi drives well(slowly see other post), its a 300TDI auto and there is a whining noise above 50mph and clonks when coming off the throttle, and when the autobox drops a gear. The prop shafts appear o.k and I have grease them with normal LM grease. the stuff that came out of them was very...

My Disco is fabulous:), but on a 1500mile trip around Scotland the only thing it needed more of is power.I done a full service B4 I left - all the filters and oil changed, the belt not due for 7000miles. Flat out with the wind behind me going down hill i'm luckey to get 90mph(on a big private...

I've got a Rover V8 in my Series 2a with standard single outlet manifold into a peashoter downpipes - and I want more!!!!:) Looking on ebay there are a few manifolds for Range Rovers and Disco's but the overal height is to long 20" and the primarys stick out to far particualy the drivers bank...

I keep breaking my series gearbox, bearings and layshaft in various boxes- my landie is fitted with a V8 with high comp heads and a 500cfm 4bbl carb - so it no suprising the gearbox can't handle it(or the rear drive shafts that look like drill bits). I would like to fit a RR 5speed manual box...

The Gearbox is making terrible 'its going to die' type grumbling and grinding noises and vibrates alot mid rpm's. The noise appears from the Bellhousing area, and can be heard at high idle in neutral and using 1,2,3rd gears its bad in 4th it quietens up alot. I thinking the bearings are shot...

I'm desperate to get my Landie muddy, my wheel arches are disapointenly shinney my tyres are clean and there is to much Tarmac were I live in Windsor, were can I go off road, Green laning or a pitt or a kind farmer?????

After not getting the hang of having no syncro on 1st and 2nd and I can see I am going to reck a perfetly good rebuilt gearbox, how easy is it to fit a five speed manual gearbox from a RR to my 1962 IIa it has a V8 fitted with a series IIa 4 speed and O/D behind it.Will I need new prop shafts...

Just got my Landy 3 or so weeks ago and there are a few probs with it. She's got a 3500cc RPI rebuilt engine and has done 6000miles since (out of warranty) on top sits a webber 500cfm Carb :) which was new when the engine was done. Starts O.K on choke then dies quicky(lots of black smoke)...

Just bought myself a 2a SWB with a V8, can't wait to off road it some were after I fitted some parabolic springs and fixed the brakes.Also need to join a club local to Windsor berkshire.