Search results

Wanting to upgrade the brakes on my s3 rebuild. Anyone got one of the twin line brake pedal setups with the servo they don't need. Also used on 90's I believe. Mark

Was investigating a long standing tick noise on my 300TDI engine yesterday. It turns out I've got a leak round one injector thats prooving a bugger to remove. Need to get it out to fit new copper sealing washer Anyone got any tips?? or an injector puller I can borrow. Also need a...

Set of 4 205/16's with about 10mm of tread throughout and no damage. Wheels not included, but tubes can be included. Really good condition, no cracking etc, only selling as just got a nice set of 7.5's. Bolt in last picture is an M10 one to give an idea of tread depth...

I've got a couple of brand new mild steel, unused original equipment Landrover exhaust parts available if anyone wants them. 1) Defender 90 tail pipe ESR 4527 £25 ONO 2) Defender 90 main box ESR 4526 £30 ONO Both as shown on Paddocks website (Though mine are...

Hi Anybody got a spare Disco PAS pump knocking around. Doesn't have to work, just needs to spin free'ly as will be made into an idler pump on my series 2 SWB. Cheers Mark

Wanting to make an exhaust for my Series 88 conversion fitted with a 300TDI engine from a Disco (or defender). Anybody got one they can measure the dimensions from the manifold flange bottom of the bend/elbow and backwards to the rear flange. Also whats the inside/outside diameter of the pipe...

I'm after a replacement windscreen frame for my S2. Don't need any glass,but do need the inner metal trims. Plan is to strip the frame and if necessary get it re-galved before fitting heated windscreens. Cheers Mark

I've stuck a 300TDI in my series 2, with existing series 3 radiator. The top connection to the rad is quite torturous, due to the 180 deg elbow on the thermostat housing exit. Are there any options available for me to pipe upwards instead?? Failing that, might need to weld a pipe fitting...

Got a leak from my throttle seal. I've found a guide to repair on another site, but anybody know anywhere I can get the throttle shaft seals/bush from? It's a 1994 non EGR pump. Currently leaking diesel from just around the spindle. Mark

Morning guys I'm fitting a 300TDI (non EGR from a 1994 commercial) into my series 2 88". Has anybody got a wiring diagram showing the main electrical connections to the engine/starter etc. Appreciate that there's not many, but want to eliminate each one from my planning. Cheers Mark

My 88 Series 2 front propshafts got a very tired spline joint. Anybody got a spare one kicking around, even if it needs a couple of UJ's replacing. Swap for beer tokens or biodiesel. Mark

I've picked up a series three wiper motor to fit on my series 2. Currently I have a motor on which I need to switch off exactly when wipers at bottom of screen. I don't think its a proper LR motor. Does a standard Series 3 wiper motor have a cut off microswitch in it? If it does, I'll fit...

I've got a series 2 with old style LWB riveted wheels, which I've had shotblasted and powder coated to give a good quality finish. Currently I've had the (tubeless) tyres/tubes refited as per original, on 4 wheels, but it did strike me highly unlikely that the rims would leak. I've got another...

Now i've got most of the mechanicals sorted, i'd like to add some soundproofing to deaden sound in rear tub and bulkhead/underbonnet/seat box areas. Anybody know any suppliers of decent stuff around Leeds. Ideally waterproof stuff, sticky backed. Although could use heavy felt type inside...

Hi I've been registered on the forum for a while, but pretty new to 4x4 ownership. I've just got my LR series 2 roadworthy/MOTed after 6 months of stripping/rebuilding. Did look like this Not quite finished, but now looks like this Mark