Search results

Just finished putting my gearbox and transfer box in after doing a clutch change and have a stream of oil coming out. I assume i have snagged a seal when putting them back together or something, but before i start ripping it all out again is there any plug or anything that should be in the hole...

Have just replaced the clutch in my 2000 90 taking the gearbox and transfer case out also replaced offside outrigger and did a fair bit of welding to the chassis. While i was there i also put a new fuel pressure regulator in. Reconnected the battery today and tried to start it, when first...

Doing the oil seal on the rear diff on my 2000 TD5 defender while the gearbox is out. All info i can find says there should be banjo for the breather. Mine doesn't have one, just has a red seal and a pipe sticking straight out the axel, is this normal and does it just pull out? Gave it a tug...

Applying a bit of rustproofing to my chassis today and stuck my finger through a bit of the bulkhead outrigger. Patched it about 18 months ago and it had been patched in the past so going to stick a new one on this time. Can anyone tell me if there is a panel available to replace the top...

Removing my gearbox and transfer box today, used this page (thanks BearDy89)as a guide, now have the box about 1 1/2 inch slid away from the engine, but the transfer box lever is hitting the tunnel. Will i get it out...

Going to replace the clutch and Dual Mass Flywheel on my 2000 TD5 defender, got a trip to the alps coming up in August and it's right at the top of the pedal and have had it slip a couple of times making a quick pull away from junctions. Anyway is there anything else i should look at doing...

Got a goodwinch tds goldfish from a mate, so now looking at winch bumpers. Was liking the devon 4x4 clubman one, but britpart one seems pretty similar. Anyone got either, whats the quality like? Britpart seems cheapest by a fair bit and any other solid piece of metal from britpart seems not...

Painted the door hinges on my defender, unfortunately forgot which one was from the left and which one was right :o, fitted them up and door seemed tight, so swapped one over and it's still tight. How do you tell the difference between them, i can't see any part number on them. When they are...

Replacing the retaining rings on my swivels as they were falling to bits, one of the balls has a little pitting, im assuming it is re-useable, can anyone confirm please? Seal was a bit chewed but it wasn't leaking... Cheers Stu

Hi, Just joined, from Penicuik Midlothian, been browsing here for a couple of weeks decided it was finally time to join in. Currently looking for a Defender 90 Station Wagon, plan is to go to the Pyrenees mountains during the summer with a few friends. Hopefully if I get one now will be...