Search results

H All, I inherited a really mangled and broken Key 1 which the PO had replaced. So, I had two working keys and one broken one. I sent the dodgy one to remote fob centre in the UK (ebay) to see if it could be repaired. For a very reasonable price I now have a working spare key 1 in a new...

Hi All, Saga continues with gearbox in limp mode. Workshop have checked all the wiring to the box and now think that it is the speed sensor from the torque converter to the box not working, so that the box doesn't know what to do ..... Reaction is to start blaming the workshop because they...

Hi all, Just had some work done to the engine where the gearbox was removed, or at least, moved back from the engine. Just today shortly after driving off, the car revved a lot then went into the next gear with a thump and showed gearbox fault. I think it is in 3rd gear. Diagnostics shows a...

Hi All, My refreshed valve block has been in for a week now. Actually, it wasn't that bad internally, with maybe only the NRV o rings looking suspect .... So, all good? Right? Wrong - problem still there - dipping at the front. The Arnott Gen 3 air bags were fitted 2 years ago. Can't be...

Hi All, I got stuck with my valve block overhaul and was saved by Paul's schematic: https://www.dropbox.com/s/7k9yv70gi2ppqms/EAS-ValveBlock-v1.5.pdf?dl=0 I had swapped solenoids 6 and 7 ..... Thanks Paul - I was able to follow the wires from solenoid to multiplug and correct the error. I...

Hi All, Think the battery is on the way out ... anyone seen this: http://www.youtube.com/watch?v=Oi8sUE9XCgA

Hi All, This is a continuation of the "replaced valve block" thread which I put under Classic by mistake. By the way, there was pressure in the tank yesterday before I removed the valve block, so I think the reservoir side is good. I carefully checked the NRVs (OK), and all the solenoids, 5 of...

Hi All, Car had been settling a bit at the front overnight but otherwise ok. Always shot up in the morning, so to speak. Overhauled a spare valve block - -all new o rings, diaphragm ok. New driver pack. Now it won't lift at all. Pipes in nicely and no leaks visible. Some...

Good Morning All, I need to replace the foil mat insulation on the firewall and also the floor above the cats. Had a quick search here and on the other place, but nothing obvious. Any recommendations, please?

Hi All, I'm getting quotes for a Prins LPG conversion. The first one mentions a toroidal tank, but I've heard that there is also an option to fit tanks alongside the chassis rails. Anybody heard of this? Is it a good idea?

Hi All, Just looking for some confirmation, please. All searching says that the P38 with 4 wheel traction control has a 4 pin front diff. Is this correct? Ashcroft think 2 pin. Cheers.

Hi All, This will be my third tank in 2 years. Last one failed in the same place as this one - where the small pipe from the radiator connects. I've done a quick search looking for genuine Landrover but only found Britpart so far (don't know what make this one is -- anything goes in Dubai!)...

Hi All, Just been on that famous website looking for a complete set of "Range Rover" (x2) and "4.6 HSE" in that rather elegant charcoaly black. Not having much joy getting the 4.6 .... Any ideas?

Hi All, I really would like to bring back my 2001 HSE to the UK in a few years. It has a new engine from Turners and things are almost 95% on it. Now, I've driven LHD cars in UK and didn't find too much trouble, but what if I converted to RHD? I can think of: Steering box and links...

Hi All, Has anyone fitted a performance (ie, higher torque) cam to a 4.6? Worth doing? Cheers

Hi All, Just posted this on the other site .. I think I've hit on something ..... wait for it ...... My Rangie has always dropped a bit at the front overnight. The valve block is new (ish), lines clean, and I changed to Gen 3s. Problem still there, so I though I'd live with it. Then, I...

Hi All, Has anyone actually swapped over the seat bases? Easy to do? I've tried to get it done by several different places but they don't want to do it ...... as if they are frightened of the RR Phantom ...

Hi All, I've been tinkering with a few P38s, 1 GEMS and three Motronic, and they show "UK Police" in the BECM section. I set two of them to "Normal" thinking that "Police" was a mistake. But, now it seems that this region (Arabian Gulf) is set to "UK Police". Any idea why this is so...

Hi All, Happy to join here. My two beauties keep me occupied fettling and fiddling.... Hope to be contributing here.