Search results

Has anyone fitted a check valve in the fuel line of a Thor V8. I have a new valve and 8mm pipe but not sure the best place to fit it. It drains back overnight and takes a few minutes to fill up again. I have fitted a new pump in the tank but its not changed things.

I have done datatek's mod on my diesel and now it never gets hot even when dragging our caravan. I have since put a new viscous fan, cant take a chance of overheating the motor. I would do the mod every time as back-up

I bought one from them for my P38 diesel. Fitted easy and works great. A bargain me thinks

I have just done Datatek's mod to mine, along with a new water pump with the metal impeller, and new thermostat and new hoses. Its working fine now. Will be pulling the caravan in a couple of weeks, so think it will be fine this time. The existing pump had a plastic impeller and the viscous fan...

It does seat heater and rear windows. The windows work fine but not tried seat heaters

Thanks guys, I think I can sort that now, new one should come tomorrow so give me something for the weekend. I will report back.

Having had many landrovers over the last 40 odd years, it will not beat me. Its just that these new fangled things are all electrical. My first series 1 had lights and a coil and that was about all that sparked.

The P38 i have just bought has no aircon so went to get it gassed today and found it had a massive leak. turns out the pipes were not fastened in the side. I can assume from this that the condensor is fubbered. So ordered a new one, my question is, when I unbolt the condensor is it easier to...

Thanks Wammers, I have checked every fuse under the drivers seat and they are all good, I guess it must be a wire connector somewhere, just hoped someone might have had it before. i will check the SRS bulb as only 1 lit

Being a longtime green oval owner I thought i would treat us to a more civilised motor. Bought a 1997 2.5DSE, and very good it is too. Just need advice on a couple of things 1, Says 'fuse 2 failed' with an acompanying anoying beep. Check fuse 2 and every other fuse too and cant find a blown...

Do tell who with please.

Have backed off the brake shoes but it has made no difference sadly. Back to the drawing board.

Got to be worth a try, maybe worth backing the shoes off a bit. will report back

I have a 200 tdi 90 with a LT77 box and a disco transfer box, When reversing it feels like a prop is falling off by the way it jumps. Its fine forward tho there is a vibration around 50 in top or 40 in 4th. I have fitted a new rear prop and new uj's in the front one. There is a bit of play in...

A Good swap I changed mine in my 200tdi a couple of months ago and it makes a good difference on the motorway. Not sure the fuel economy is any different but can now here the radio at 60_70. You need to drill and tap 2 holes for the handbrake or drill the bracket so the original hole on the...

I am looking for a straight front bumper

Im greedy, got two ex jap imports, my 3.9 1994 and hers 300 tdi 1997, both totally rust free. Waxoiled them so should last for years. Take no notice of the mileage but both mine are in really good condition. £4000 for a good as new disco 1, seems cheap to me.

Hiya, I have a 3.9 V8 1994 Disco ex japan with only 53000 miles on and its nearly mint. It just runs rich! I have had it since Xmas and fitted,3 sets of plugs n leads, 4 different caps, 3 rotors ( both now genuine Lucas), new coil, Lambda sensors and temp sensor, but it still ticks over rough...