Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    Thinking of getting a p38 but which one?

    I'm thinking of buying a Range Rover P38 but which one petrol diesel or gas converted? Which model? Is there anything I should look out for regular problems faults? I want to use it as my daily runner. I don't do lots of mileage but do use the motorway every week approx 60 miles. I am...
  2. S

    When I press the brake pedal it brakes normally but if you press it again straight aw

    Thanks to all the people who gave me advice you were totally right a tiny hose had come off once reconnected it worked as it should. It was a awkward to get to but needed to unbolt some bits but its sorted now.
  3. S

    When I press the brake pedal it brakes normally but if you press it again straight aw

    Thanks for all your support and help when I get home I will follow this up and check it out. The support and advice here is fantastic. Thanks again
  4. S

    When I press the brake pedal it brakes normally but if you press it again straight aw

    Hi all any ideas as to this fault that has developed over time progressively getting worse. When I press the brake pedal it brakes normally but if you press it again straight away then it doesn't slow the vehicle. Once the vehicle has been back on power its fine until you double brake. I was...
  5. S

    Black Plastics...

    Hi i dont know if this will help you but as I tried black boot/shoe polish as the plastic fades and turns grey. I have used the sponge boot polish on the bumpers wheel arches and exterior plastics etc and they come up a treat wipe on allow to dry a little but not completly and rub off any...
  6. S

    new caliper fitted still grinding?

    Thanks teddywood1 and Dann for the advice I will give it another look at tommorow after work. This members of this site are so helpful to other less knowlwgable individuals. I hope I will be able to help others in thesame way in the future. Thanks again Darrell
  7. S

    new caliper fitted still grinding?

    Hi Kizzeh thanks for the swift reply. I have just replaced the abs sensor on the other side as the three amigos were lit up changed it and they all went out as they should two straight away and the abs one at around 5mph so gusseing theat was done ok.
  8. S

    new caliper fitted still grinding?

    Hi any ideas would be much appreciated. I have just changed the drivers side caliper and pins on my td4 for a new unit I blead the unit and it intiallly drove fine and after stopping going in for a well earned brew it seems to judder like the anti-lock breaks are coming on and grind a little...
  9. S

    Freelander Faults poll

    Hi I have a 2000 td4 sport which I have owned for 8 years it had 98k on it when I bought it and it now has 133k so as you can see its not had a hard life in the time I have owned it. Problems I have encountered during this time are back left brake cylinder failing twice the tailgate...
  10. S

    3 Amigos How to remove an ABS sensor

    Thanks for all the postings of guidance here I have my freelander on an axle stand ready to start in the morning i think the wheel will be going back on before tackling the sensor.
  11. S

    Hi another newbie to the site

    Hi all, I am new to the site and have 2000 freelander 3 door td4. I know its not the big stuff like some of yours but it does what i need it for.
Back
Top