Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    ABS Pressure Warning Switch Fault & Blend Motors

    Ah, Ah that would explain everything then!!!!! Teach me to reply to a post quickly without checking the thread again!!! D'OH!!!
  2. M

    ABS Pressure Warning Switch Fault & Blend Motors

    How did you guess Britpart Blend Motor, you'd have thought that i would have learnt my lesson with Britpart when my month old Viscous Fan Disintergrated whist on the Motorway doing about 60!!!!
  3. M

    ABS Pressure Warning Switch Fault & Blend Motors

    A couple of Months ago, I had the ABS light up, it was diagnosed as the Pressure Switch. I bought a second Hand Pressure Switch from Emmotts and fitted it, and all was ok. The ABS Lights has come on again, this time the diagnostics state ABS Pressure Warning Switch, does any body know if this...
  4. M

    Wheel Nut Size

    I have a problem with the Swollen Wheel Nut Chrome covers. I have bought some new Wheel Nuts and managed to get the Chrome Cover off the offending wheel nut, however, the orginal wheel brace does not fit its now to big, does any one know what size Socket I require for the orginal Rusty Wheel...
  5. M

    ABS & Brake Warning Lights out and Battery Warning Light On

    The Fluid is well above the max mark, once the engine has started and the pump has switched off. The sensor doesn't actually touch the Brake Fluid so am a little confused on how it works.
  6. M

    ABS & Brake Warning Lights out and Battery Warning Light On

    Sorry, Low Brake Fluid Level, I don't think it has a brake fluid pressure fault read out. Is it worth bleeding the brakes again if it is a pressure issue? will this help becuase the brake warning lamp is still on.
  7. M

    ABS & Brake Warning Lights out and Battery Warning Light On

    I checked the voltage at the Battery when the engine was running was only 12v present, I unplugged the Brake Fluid Sensor the engine spluttered very slighty and the voltage went back up to 13.8v. I then plugged the sensor back in, Voltage remaind at 13.8 but now I get low brake fluid pressure...
  8. M

    ABS & Brake Warning Lights out and Battery Warning Light On

    After spending the day with a brake problem and putting 2 warning lights out, I am now getting a battery warning light but no error message. Any ideas?
  9. M

    Brake Fluid Level Sensor

    After an ABS Fault on my car and the constant Low Brake Fluid Level Message and Brake Warning Light, I have change the ABS Pump many thanks to Clarky for his help and the Accumulator. This didn't cause the Low Level Fluid Warning to disappear I purchased from the Scrap Dealer a new resesvior...
  10. M

    Ok... Now my brakes have failed!!!! ABS light on, brakes don't work??? WTF?

    Found it, with the Multi Plug in the end of it. Look quite straight foward, thanks for the advice on changing the resesvior I will leave that and see what happens. Just one more question sorry to be a pain, when you bleed the brakes did you have the car up on stands or the wheel off or can I...
  11. M

    Ok... Now my brakes have failed!!!! ABS light on, brakes don't work??? WTF?

    Many thanks for the advice, just ordered the bits from Emmotts for delivery Friday. I am assuming the Switch is located under the pump which is under the a accumlator, I haven't had chance to have a good look due to the rain down here. You said you did it with the pump in situ did you do it all...
  12. M

    Ok... Now my brakes have failed!!!! ABS light on, brakes don't work??? WTF?

    Thanks for your info and research on this matter. I have just had mine diagnosed with faulty pressure switch. Is this something I'll be able to do with limited Mechanical experience? I will be phoning Emmotts in the morning to try and order the pressure switch for the weekend. Are there any...
  13. M

    Low Brake Fluid & Now ABS Light

    Hi, Since I have had my Range Rover approx 2 months the low level brake fluid warning light has been on, I assumed it to be the sensor on the resevior as I got the garage to check the brakes for leaks etc whilst it was being MOT'd and the level has never gone down. Can the sensor be replaced...
  14. M

    Breaking p38 range rover

    Hi, Can you confirm the colour of the Interior please. I am after a Black Parcel Shelf, the Boot Panel the CD Autochanger fits into and the cover off a Black Leathert Drivers seat.7 Many thanks
  15. M

    Getting the job done.

    Sorry, can't offer much help, but will be watching this thread caefully as planning on changing my Fan this weekend (weather permitting of course)
  16. M

    Specialist nr. Chelmsford Essex & BMW Embossed on Engine Cover

    Thanks every one for the help. Sorry I haven't been on here for a while I was on holiday last week. Well carried out the Mod and the engine hasn't over heated yet, this includes doing 80 miles yesturday with a horse and trailer and all the stuff that comes along with a horse. with the...
  17. M

    Specialist nr. Chelmsford Essex & BMW Embossed on Engine Cover

    Ok done the test again and sure enough when the engine was hot I could stop the fan. Did you say there was a mod to use the a/c fans, I might use this as a tempoary solution although to be honest here in Essex we have no hills so think only traffic will cause the fans to come on.
  18. M

    Specialist nr. Chelmsford Essex & BMW Embossed on Engine Cover

    Hi, Well checked the Fan today when it was up to temperature, it didn't shred the newspaper but i certainaly wouldn't want to put my fingedrs anywhere near it, one sheet of newspaper tightly roll wasn't enoigh to stop it. Yes the drivers foot well is wet so am guessing that the O Rings. Left...
  19. M

    Specialist nr. Chelmsford Essex & BMW Embossed on Engine Cover

    Hi, Thanks for the quick replies. Does the Fan cut in when it gets hot or is it running all the time? Most of my other cars have been when its hot?
Back
Top