Search results

hi slimboy never thought o that one..it only rattles/knocks over small bumps/gravel type surface but no big knocking at all and seems to be coming from drivers footwell/bulkhead..will also have a look at the rear bushing on the wishbones although the mechanic says he went round them all with a...

hi thanks for reply but best way to describe this is the exact same noise as drop loinks and coming from the same area

hi all help required had an annoying knock a few months ago so changed track rods and drop links...the noise went for a short time and came back so purchased ARB bushings and took the car to the mechanic...picked the car up and he said its not them bushes so kinda stuck thanks in advance

ta baptista....will give it a go then

hi all got a wee bit of chattering from front end..sounds like anti rollbar bushes(did drop links last year) is this a diy job or do i take to garage tia tony

ta haigy do have to drop the full prop

hi all can any one tell me if there are special tools needed for vcu bearing swap and how hard is it to do thanks in advance carderv

thanks bigeeee...need it for work in morning and only car we have and have to work on road as no drive ect...so may just fill a couple of cans a couple of times and hopefuly petrol will dilute... thanks again bigeee

just done the sniff test and its defo petrol...do ijust put £20 to £30 diesel and let it run?????? thanks again bigeeee

78k on clock

didnt lift from counter ////feel like a right plonker

thanks bigeeeee...gonna have a quick look...will post how i get on

is the filter the long canister beside the pump under the rear wheel arch ????

only put a tenner in///fuel light was on

might sound silly but on way home from work i topped up the diesel on my 03 td4 and the car started jugging within 500 yards...first thought was dirty fuel///when i did get home about 1 mile further i left the car running while i had my dinner when i went back out i noticed a distinct noise...

thank you thomasdk

hi all just a quick one..does anyone know the numbers on the bearings for the vcu thanks in advance carderv

thanks for the quick reply jamesmartin will get pipe n bits tomorow and get stuck in once again thanks for the help

hi all...just a quick one i have to replace 3 brake pipes for mot and one is the one that goes over the tank....will i be able to use a jointer and make a shorter pipe and will it pass mot with a joiner regards carderv

thanks guys i did have odd tyres on...but all the same size now... i will take the prop off and see if its the vcu and get back to you`s regards carderv