Search results

Hi looking for some help on how hard it is to change front calliper pins on a Freelander 1 it has the pin with the rubber sleeve on one pin thanks in advance:)

Just WANTING TO CONFIRM I CAN FIT 235 55 17R WITH NO MODS TO CAR BEFORE BUYING THANKS IN ADVANCE:)

Hi just to confirm can I fit 235 55 17 on my td4 running 225 at the minute:)

Hi looking for help have worked out cab heater wiring to get that running I know i have to have a +12 volt to pin 3 on socket x of the fbh what i need to know is there already a wire to pin 3 and if so were dose it go or do i have to take the inner splash wing off and fit a wire and pin in the...

Hi looking to fit a timer to my fbh which will put the heater on for aprox 20mins Do you have to remove the nearside inner wing to get to the wireing I belive you have to put a postive feed to pin3 of the unit to fire it up I may use a remote unit to trigger the timer or mybe a clock Has anyone...

Hi as anyone had one of these leaking and can they be resealed

Hi as any one had a problem with common rail leaking diesel from the Allan key nut end

Hi as anyone had a problem with a faulty rail leaking it not the injector pipe definitely from the lower side looks like it could be the blanking plug in the end of the rail were it is coming from :confused:

Hi i have a leak on one of my injector pipes dose anyone know the part number and is this a common problem thanks :confused:

Hi here again dose anyone know if you can fit the small cover instead of the large full engine cover to an 2000 reg td4 Also should the leak back rubbers be soft or hard type reson for asking when i have been on a long run getting a pool of desile near left hand injector just in the well in...

Hi Just finished mods pierburgh maf synenergy 2 with dash switch set on 8 silicon pipes egr by-pas and k and n air filter and of course 2 stroke oil now to see how she goes only one slight thing noticed with engine cover off diesel near injectors moped off don't know if it a leaking injector 0r...

Hi as any one fitted a performance air filter to a td4 and which type did you fit and dose it make a difference:decision:

Have just re insured throw Adrian Flux half the price of old company and did not have to pay Moore for mods asked about fitting a roverron kit and they said it would not affect the premium happy days means will soon be able to buy a roverron kit and save Moore :D

Hi just got some new pods of flebay to replace the old ones as the plastic has deteriorated is there an easy way to fit them or dose the full bumper have to come off :confused:

Hi noticed to day after fitting silicon inter cooler pipes The rubbers on the engine cover were pierced so did not fit it back until new rubbers obtained Noticed water near oil filler cap must be getting there after raining so been blown onto the injector area Any one had similar and were dose...

Hi dose any one have a body kit fitted and any pic's and views on them:cool:

Hi after doing egr mod and cleaning manifold brake pedal seems to go hard any ideas of why

Hi can any one tell me if the bottom part of the drivers seat is the same in the 3 door as the 5 door:)

Hi been looking at a stainless egr on fleebay £40 compared to an aluminum one at £57 any advice on which one is best or disadvantages :confused:

Hi i have a 215/65/r16 goodyear wrangler hp still got bubbles on it was on my last freelander as spear £25 also have stainless cover with disc needs new lock would clean up well £20 i live near Hull East-Yorkshire :)