Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. 18 stoner

    TD5 fuel starving!!

    Cheers for the help guys! Ordered the filter/one way valve thingy, also the small jet insert for the inner pipe fitting too. On fitting I removed both fittings to the rear of the filter head & neither had inserts in them! Obviously there’s been issues in the past and someone pulled the guts...
  2. 18 stoner

    TD5 fuel starving!!

    Yeh cheers Toseland. I’d sort of got that far to be honest, a bit more to the story is; We’ve had the tank out (to weld the chassis leg) and fitted new pipes while it was out. Removal and refitting of the tank and fitting new pipes hasn’t altered the symptoms in any way. Do you think it could...
  3. 18 stoner

    TD5 fuel starving!!

    Here goes, looking for an easy answer if anyone has had this one before! Lol! Disco tank pump will scream when ignition is put on like when bleeding a new filter through. The lower the fuel in the tank, the worse it is. If you don’t wait for the pump scream to subside before starting, it will...
  4. 18 stoner

    Floppy Sun Visor!!!!

    Really? Has no one ever had this before?
  5. 18 stoner

    Floppy Sun Visor!!!!

    Can anyone offer advice on tightening up a sun visor? I've recently come across a replacement drivers side visor, as my old one had the card securing flap thingy torn off, and I like to stick a pair of shades in it. Just purchased a truck cab for a conversion I'm doing and it came with...
  6. 18 stoner

    3.9 into defender???

    Bit of a refresh On this thread, due to family circumstances I didn't get much further than the last post on this thread. Now, with a new spur of enthusiasm I'm wanting to crack on with the transplant. One thing that has happened though, is over the months I've started fancying the carb...
  7. 18 stoner

    Will td5 110 axle bits interchange with disco 3.9i?

    Cheers for the pointers fellas, got a couple of things to look into now. Will get back with findings, cheers. Pete.
  8. 18 stoner

    Will td5 110 axle bits interchange with disco 3.9i?

    I'm pretty sure it has a pan on the back with a ring of bolts:confused: Are the bits difficult to get for Salisbury? I've tried looking on lrseries but the search system on there is hard work sometimes! I'm trying to look at the quickest way of getting running again as its my work...
  9. 18 stoner

    Will td5 110 axle bits interchange with disco 3.9i?

    Sorry, the 110 is 2001 on a y reg. Not sure if that says its one or the other?
  10. 18 stoner

    Will td5 110 axle bits interchange with disco 3.9i?

    Just looking for a quick answer really from one of you guys who are familiar with different specs! Basically, I've blown something in the back axle of my hi cap td5. It's deffo either diff or half shaft. I happen to have an s reg v8 3.9 disco that I'm going to break. Is there a slim...
  11. 18 stoner

    Diff ratio comparisons??

    That does look impressive steve, credit to the work you put into that.
  12. 18 stoner

    Diff ratio comparisons??

    Mmmm, gonna have to give this a little thought what's best way to go I guess:confused:
  13. 18 stoner

    Diff ratio comparisons??

    Cheers for that Steve, and yeh, will be going away from the salisbury. Reason being the old one needs work. The spring mounts need replacing and the brakes are worn out, corroded and seized. I bought the disco for the engine to transplant into the 110, and it happens to have a refurbed...
  14. 18 stoner

    Diff ratio comparisons??

    Forgot to add, the 110 is manual and disco auto, so not sure if that makes a difference?:confused:
  15. 18 stoner

    Diff ratio comparisons??

    I'm hoping someone can either tell me, or point me towards a list of different diff ratios that were fitted to various green oval stuff. The specific ones I'm after are 1987 110 V8 station wagon rear axle and disco 1 1998 V8 3.9efi rear axle. I think you may guess I'm after putting the disco...
  16. 18 stoner

    3.9 into defender???

    Yep, cheers for that bud, Ive been doing a bit with the ole search button and found out quite a bit. Seems I need a 470ohm resistor sticking in and that'll do it. Even found out where its situated and it could easily be a green one too! Cheers for all the pointers guys, and if anyone else...
  17. 18 stoner

    3.9 into defender???

    Ok then, cheers for that, its a heads up before I get to regretting it, but what should I do with the lambda sensors if I fit my old 3.5 manifolds and downers?:confused: .
  18. 18 stoner

    3.9 into defender???

    :dance: Was imported 2006. Its clean under but the rear arches are starting to go. Chassis clean. Im not too worried about any of that to be honest, but will make it good to sell on bits I guess. So there's no real power difference? Yeh, if it comes to it I'll stick it up for parts in...
  19. 18 stoner

    3.9 into defender???

    So, here's one for you all. I've got decided on the EFI. With all its pro's an con's I think its the best option with all things considered, especially the length of time I intend to keep the landy. Here's the thing, I've got the chance of a 3.9efi disco with relatively low mileage as a...
  20. 18 stoner

    3.9 into defender???

    Cheers for that, sure looks like there's some reading there! I may be a while, thats a huge site. Thanks again.
Back
Top