Search results

As i keep blowing hub seals even after garage doin them as i thought i was doing something wrong im goin change stub axle. Now my bolts look ****ed so im goin replace them all what is product number to find them and r fronts and rear the same number

I love the green oval and have ny trusty 300tdi. But looking for a d3 with a budget of 10 to 11k. Theres few 08 09 plates in that region but tax is 490 n 505 a year And 2 56 plates at 290 a year tax Why is there such a hike in price over 12 18 months newer

I fitted a nrecon steering box the other week and a power steerinv pump and new drag links at the same time. I refitted the drag links and passanger side has stayed tight with pin in. Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the...

I fitted a recon steering box the other week and a power steering pump and new drag links at the same time. I refitted the drag links and passanger side has stayed tight with pin in. Drivers side which goes thru the drop arm was making a noise and upon inspection the pin is in place but the nut...

Has anybody made there own timing case breather. For.a 300tdi

Fitted a recon box to my 96 disco bled it via the resovoir and thru the bleed nipple on top box. Ran fine for few days now its making a noise when turning right. No leaks no loss of fluid do i bleed it again now its bin run in a bit

Today has been a busy day sorted out back axle fitted new panhard with polybushes and have always had a power steering leak from somewhere we today i was investigating and found it is voming from the shaft seal.had a poke around now when i turn left it has power steering and no loss of fluid now...

I changed a bearing the other weekend and went work all week bout 4 mile a day and no leak then went out for run to in laws 30 mile round trip and hub seal ****ing out oil on the hub i just changed bearing on. Whipped hub off and seals got split on the lip to the stub so changed it and emery...

Doing a rear bearing today on my 96 disco and the caliper bolt seems to have been cross threaded ive re tapped it and itl do but just wandered if that part can be replaced on these axles as i want to fully refurb the axles at some point.

Laning at weekend and had 2 blow outs i run 31 x 10.50 x 15 mud terrains and fitted my spare of same size but had fit my mates 265 75 16 to the rear axle to travel home. And since fitting it and travelling 25 miles home it was horrible ride and felt like back end slipping out and gear changes...

Got some rocksliders to go on my disco 1 and it has no brackets to go from sliders to outrigger on chassis. I have got some 6mm steel plate to make some but i need to no how deep they are from the bottom to the top. Ive tried offering them up then cut to much off

Today whilst towing my caravan on a 200 mile trip first 110 mile were fine pulled over for a pee. Set back off again and after 50mph i get a judder. Friday the day before i towed it i check all oil levels and bearings and prop ujs and greased. 1st thing ive checked when got to site is props...

Had my mot on the disco yesterday it passed but rear trailing arms bushes are perished where meet the chassis. Ive got a full set of polybushes but there for a range rover classic. They look the same so is it ok to fit these to the disco or should a buy for the disco

Fitted boost pin. Pin line is dead centre. But there is no power low down the rpm tickover is 800rpm then no power till 1500rpm then boosts really well change gear and if it goes below 1500 its no power again till 1500 the goes ok.remove pin and its dead centre.

Few months back had 1 squealing like hell.got replacement and changed it. When i removed it fell apart literally in my hand. Fitted new 1 in and now 5 weeks later thats done the same. When belt is spinning around the tensioner that bolts to engine is bouncing around alot and the new bearing is...

Alway had trouble with towing my caravan and lagging on hills needing to drop to 4th to get up anything so tweaked the pump properly marked upa dn got it running sweet no smoke plenty of power but still no power on hills. So had a mate give me a boost pin he had for his disco before tin worm...

I had a grinding noise coming from brakes. Fronts were fine.rears were fine but drivers side rear outer pad had fell thru caliper and was rubbing hub hence the grind. I took pads out and pressed brake to push piston out cleaned and pressed back in did this 3 times.and re fitted with new pads...

My freelander has just over past few weeks noticed water in the tool box cubby hole.lifted carpet out dried and cleared all water up.left parked up for week after being completely dry. Day of rain and its wet again.the boot carpet isnt wet any part of boot floor its just collected in the tool...

For sale is my freelander 1.8 serengeti 12 mo th mot till next april 2016 K series engine with genuine 73k on clock Bodywork is gunmetal grey and has 17 inch alloys with good tyres Interior has a rip on drivers seat bout 3 inches. Passenger seat has a stain on it ive tried and valeter tried to...

My 300tdi disco on 96 manual. The 2 button fob always worked lock and unlock from a distance. Now it got right up to it.so changed the battery in fob.worked fine.now it wont unlock. Press open nothing press lock itl lock. Open with the key and the alarm will go off so i bave shut it then lock...