Search results

Bypassing the immobiliser doesnt involve anything more than few cuts.and new wire to pump. Easy enuf to do.

Bypass immibiliser easy

Lazy starter motor

I made my own off ebay. Fraction of cost. Few connectors and aquatic piping

Lazy starter

No should be direct fit.

No should be direct fit.

Lazy starter or battery would be my 1st checks

If sedimeter bin bypassed then leave it off and check pipes ok.the fefenders dont have them

Lift pump

I removed mine and fitted the proper discovery mats in to it.take up majority of the room the carpet covered and will reveal all the holes you have

And vibration will be the prop uj grab it with 2 hands and shake itl show the dodgy uj

If you can weld its a plus with any landrover get the carpets up and you may find that the floor is rotten already.

As i keep blowing hub seals even after garage doin them as i thought i was doing something wrong im goin change stub axle. Now my bolts look ****ed so im goin replace them all what is product number to find them and r fronts and rear the same number

Under the seat base is a crap diaphram to hold base up. So take seat out and tie that back to gether with rope thatl fix ya seat till you can change them

Lazy starter Bypass the sedimeter Try good connection from battery to starter

Lazy starter motor might look ok but its the internals that get lazy not outer

2mm fine mate

Do the bushes yourself. Its easy i use paul d method of drilling the rubber out then chosel the metal out tap thru then press new polybush in

Id say bluey grey its not losing oil or coolant.n the 2 aint mixing it just once cold itl smoke when throttle is off just a puff then stops. It hoes once warm